STM32W108C8

Electrical characteristics
STM32W108C8
Figure 55 shows typical output power against power setting on the ST reference design.
Figure 55.
Transmit output power
14.7 Digital I/O specifications
Table 150 lists the digital I/O specifications for the STM32W. The digital I/O power (named
VDD_PADS) comes from three dedicated pins (Pins 23, 28 and 37). The voltage applied to
these pins sets the I/O voltage.
Table 150.
Digital I/O characteristics
Parameter Conditions Min. Typ. Max. Unit
Voltage supply (Regulator
Input)
VDD_PADS 2.1 – 3.6 V
Low Schmitt switching threshold
V SWIL
Schmitt input threshold
going from high to low
0.42 x
VDD_PAD
S
–
0.50 x
VDD_PAD
S
V
High Schmitt switching
threshold
V SWIH
Schmitt input threshold
going from low to high
0.62 x
VDD_PAD
S
–
0.80 x
VDD_PAD
S
Input current for logic 0 I IL – – -0.5 µA
Input current for logic 1 I IH – – +0.5 µA
Input pull-up resistor value R IPU 24 29 34 kΩ
Input pull-down resistor value R IPD 24 29 34 kΩ
V
205/215 Doc ID 018587 Rev 2