Miele Technical Diagrams - Euro Appliances

More documents

Recommendations

Info

Building-in diagrams Gas hob KM 391 G Cooker hood DA 396-5 Cooker hood DA 399-5 1 ) Front 2 ) Mains connection box 3 ) Gas connection Space behind hob 50 mm Space to wall or tall unit at side of hob 150 mm Note: This hob can be fitted above a <strong>Miele</strong> oven, in which case the worktop must be at least 40 mm thick. 1 ) Extraction 2 ) Recirculation 3 ) Venting grille position at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation mode) 1 ) Extraction 2 ) Recirculation 3 ) Venting grille position at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation mode) Cooker hood DA 5495 W Cooker hood Cooker hood DA 6290 W (Lumen) 1 ) Extraction 2 ) Recirculation 3 ) Venting grille position at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation mode) 1 ) Extraction 2 ) Recirculation 3 ) Ventilation grilles at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation) S: Safety distance between cooker hood and hob 1 ) Extraction 2 ) Recirculation 3 ) Ventilation grilles at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation) Cooker hood Cooker hood DA 5330 W Cooker hood DA 5320 W 1 ) Installation area 2 ) Area for vent cut-out if ducting to be laid through the ceiling * Safety distance between cooker hood and hob: min. 365 mm 1 ) Extraction 2 ) Recirculation 3 ) Ventilation grilles at the top for recirculation ) Vent cut-out positions (Area 5 not required for recirculation) * Safety distance between cooker hood and hob: min. 350 mm Shaded area for vent cut-out 106
Cooker hood DA 390-5 Cooker hood Cooker hood DA 5000 D 1 ) Alternative positions for feeding through the mains cable 2 ) Cut-out for feeding the connection cable through to the EXT motor 3 ) Extraction 4 ) Recirculation 5 ) Venting grille position at the top for recirculation 1 ) Possible positions for cable outlet, EXT cable and extraction ducting 1 ) Possible positions for cable outlet, EXT cable and extraction ducting Cooker hood DA 2050 1 ) Cut-out for mains connection cable, EXT cable and extraction ducting 2 ) Height range for extraction mode 3 ) Height range for recirculation mode 4 ) Optional height range for extraction mode 5 ) Ventilation grille positioned at the top for recirculation 1 ) Cut-out for mains connection cable, EXT cable and extraction ducting 2 ) Height range for extraction mode 3 ) Optional height range for extraction mode * Cut-out dimensions Depth T at the back of the niche must be at least 25 mm Cooker hood DA 2170 Cooker hood DA 3160 Cooker hood DA 3190 * Cut-out dimensions Depth T at the back of the niche must be at least 25 mm The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. The partition wall must be removable. The front section of the wall housing unit must be fitted with a shelf to the depth of the partition wall. The partition wall must be removable. * Can also be fitted in a 600 mm wide wall unit 107
Page 1 and 2: Building-in diagrams 90 cm oven H 5
Page 3 and 4: Combination steam oven DGC 5061 Com
Page 5 and 6: Induction hob KM 6382 CombiSet CS 1
Page 7: Installation of two or more CombiSe
Page 11 and 12: Notes 109
Page 13 and 14: Miele - XL ovens Model no. H 4882 B
Page 15 and 16: Miele - 60 and 70 cm single ovens M
Page 17 and 18: Miele - Microwave ovens Model M 820
Page 19 and 20: Miele - Coffee machines Model no Co
Page 21 and 22: Miele - Ceramic and Induction Hobs
Page 23 and 24: Miele - CombiSets Model no Type of
Page 25 and 26: Miele - Island cooker hoods Model n
Page 27 and 28: Miele - Wall mounted cooker hoods M

Miele Technical Diagrams - Euro Appliances

Create successful ePaper yourself

Delete template?

Save as template?