Palco 3/5 - Prolight
Palco 3/5 - Prolight
Palco 3/5 - Prolight
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
GB<br />
SGM Elettronica - Light Technology<br />
Installing the new front lens panel<br />
3<br />
4<br />
1 2<br />
4<br />
3<br />
1 Carefully position the new set of lenses, paying particular attention to the alignment of the LEDs in relation to the<br />
lenses.<br />
ATTENTION !!<br />
before positioning the new set of lenses, carefully clean the LEDs with a soft dry cloth.<br />
CAREFULLY AVOID TOUCHING THE LEDs – should this occur, clean them with a dry cloth, under no<br />
circumstances using solvents, products for removing grease, or abrasive objects.<br />
Once the new set of lenses is positioned, fix it to the matrix with the appropriate screws, without tightening them<br />
individually, but following an orderly sequence, progressively tightening them in one after another.<br />
2 Replace the front glass, after having cleaned it with a soft dry cloth.<br />
3 Close the 2 (top and bottom) shells of the head, ensuring that the front glass is evenly closed between them.<br />
4 Fix the two shells with the appropriate rear screws.<br />
<strong>Palco</strong> 3 - <strong>Palco</strong> 5 - 43 - User's manual 1.01
Change language