Palco 3/5 - Prolight
Palco 3/5 - Prolight
Palco 3/5 - Prolight
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SGM Elettronica - Light Technology<br />
GB<br />
Maintenance<br />
Ordinary maintenance<br />
<strong>Palco</strong> does not require much maintenance work, so it must be remembered:<br />
To avoid operating the unit in unsuitable conditions and clean it externally, particularly in permanent outdoor<br />
installations, where objects and material can deposit on it through time. (e.g. leaves and/or rubbish of various kinds).<br />
The <strong>Palco</strong> head’s rear radiator must be used in the best possible conditions in order to dispel heat and ensure the unit’s<br />
good operation<br />
Also periodically clean the front glass, particularly if the unit is exposed to the weather.<br />
Should the fixture remain unused for a lengthy period, the clock data may be lost. In this case, the internal clock must<br />
be reset.<br />
Special maintenance<br />
Special maintenance work is required in the following cases:<br />
Breakage of one or more LEDs<br />
External damage to the shell caused by violent impacts<br />
Breakage of the front glass or any other part that compromises the unit’s protection rating<br />
Breakdowns in the fixture’s on-board electronics<br />
ATTENTION !!<br />
Do not attempt to repair the fixture. Only authorized staff can work on solving the type of problems<br />
mentioned above.<br />
Contact the nearest SGM assistance centre in the event of special maintenance work being required<br />
User's manual 1.01 - 40 - <strong>Palco</strong> 3 - <strong>Palco</strong> 5