Palco 3/5 - Prolight
Palco 3/5 - Prolight
Palco 3/5 - Prolight
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
GB<br />
SGM Elettronica - Light Technology<br />
Display brightness<br />
Operators can select one of the brightnesses available for the <strong>Palco</strong> (standard or very low). This option was included for<br />
theatre and television use, where excessive brightness can be disturbing. To adjust display brightness, proceed as<br />
follows:<br />
BRIGHT=40%<br />
1. Use the UP/DOWN keys to find the “Bright” menu<br />
2. Press “Enter” to confirm the choice. The text on the display will begin to flash.<br />
3. Use the UP/DOWN keys to select the required option from those available.<br />
4. Press “Enter” to confirm the changes.<br />
Invert display<br />
When the fixture is suspended “upside down” from a structure, the operator can turn the text on the display through<br />
180°, thus enabling the menus available to be easily read.<br />
To change the reading angle, proceed as follows:<br />
DSPL FLIP<br />
1. Use the UP/DOWN keys to find the “Dspl Flip” menu<br />
2. Press “Enter” to confirm the choice. The text on the display will begin to flash.<br />
3. Use the UP/DOWN keys to select the required option.<br />
4. Press “Enter” to confirm the changes.<br />
DMX delay<br />
It’s possible to decide for how many seconds the fixture must hold the last operating status if there is no DMX signal.<br />
“Delay” time can be set between 0 and 998 seconds. If set at UNL, the fixture will hold its standby status for an<br />
unlimited time. This function is indispensable in the event of the DMX signal being accidentally interrupted. To set the<br />
required time, proceed as follows:<br />
DMXDLY=20<br />
1. Use the UP/DOWN keys to find the “DMXDLY” menu<br />
2. Press “Enter” to confirm the choice. The text on the display will begin to flash.<br />
3. Use the UP/DOWN keys to select the required length of time. If UNL (unlimited) is set,<br />
the last valid operating status is held no matter for how long the DMX signal is<br />
missing.<br />
4. Press “Enter” to confirm the changes.<br />
Days of the week<br />
It is of fundamental importance to set the day of the week on the <strong>Palco</strong> if it has to be used later in Stand-alone mode.<br />
DAY=TUE<br />
1. Use the UP/DOWN keys to find the “DAY” menu<br />
2. Press “Enter” to confirm the choice. The text on the display will begin to flash.<br />
3. Use the UP/DOWN keys to select the current day of the week.<br />
4. Press “Enter” to confirm.<br />
<strong>Palco</strong> 3 - <strong>Palco</strong> 5 - 27 - User's manual 1.01