Palco 3/5 - Prolight
Palco 3/5 - Prolight
Palco 3/5 - Prolight
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SGM Elettronica - Light Technology<br />
GB<br />
Colour Mode Channel Ch 8<br />
DMX Value Mean Value Function<br />
0 - 63 32 White balance disabled (Full Colour)<br />
64 - 189 127 White balance enabled (Balanced)<br />
190 - 250 220 White balance disabled (Full Colour)<br />
251 - 255 253 Store a new white balance<br />
CTC Channel Ch 6<br />
DMX Value Mean Value Function<br />
0 - 19 10 OFF<br />
20 - 255 138 From Cold + 2000 K° to Warm - 2000 k° compared to balanced white or<br />
not<br />
Operation<br />
Colours<br />
<strong>Palco</strong> 3 and <strong>Palco</strong> 5 are fitted with a white balancing system that can be customized and stored for each fixture for an<br />
unlimited number of times. Moreover, in the context of any balance which is set, it’s possible also possible to adjust<br />
colour temperature in a completely dynamic manner according to needs, by means of the CTC channel, with a certain<br />
range round the balanced white or Full Colour value.<br />
All these operations can be carried out via DMX, or directly on the fixture itself. Should it be necessary to balance the<br />
white via DMX, proceed as follows:<br />
Set the Color_Mode channel at 220 (85%)<br />
Use the RED, GREEN and BLUE channels to obtain the required white balance<br />
Set the Macro channel at 71 (28%)<br />
Increase Color_Mode to the maximum - 255 (100 %). After 4 seconds, the new white balance is stored by the <strong>Palco</strong><br />
The Color Mode channel can also be used as an instant selector between: previously stored balance (at the value of 127)<br />
or Full-color Power (at the value of 0) when total colour emission is required, without any limits being set by the<br />
balance.<br />
User's manual 1.01 - 22 - <strong>Palco</strong> 3 - <strong>Palco</strong> 5
Change language