Palco 3/5 - Prolight
Palco 3/5 - Prolight
Palco 3/5 - Prolight
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SGM Elettronica - Light Technology<br />
GB<br />
To change the DMX address, proceed as follows:<br />
• Press the UP key. The message Addr=1 will appear<br />
• Press Enter and “Addr=” will begin to flash<br />
• Use the UP and Down arrow keys to choose the required address<br />
channel<br />
• Press Enter again to confirm<br />
<strong>Palco</strong> requires 8 DMX channels for the control of all its functions.<br />
With a DMX 512 control universe, up to 64 can therefore be controlled simultaneously and separately<br />
ATTENTION: do not use more than 25 fixtures on any one DMX line! Should it be necessary to<br />
connect a larger number of fixtures, the appropriate Buffers or Splitter must be used for each 25<br />
fixtures, to ensure that the signal quality remains unchanged.<br />
Check the following table to see the exact DMX address for each fixture connected on the same DMX line.<br />
User's manual 1.01 - 18 - <strong>Palco</strong> 3 - <strong>Palco</strong> 5
Change language