Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Control Functions - Playback<br />
13.00 Playback<br />
The <strong>Event</strong> offers a combination of manual and automated playback controls which<br />
are both powerful and easy to use:<br />
- Two banks of Presets of channel faders provide direct control of each channel.<br />
- The Assign Masters control individual Memories and Chases.<br />
- A pair of Assign faders can control a Stack containing any number of<br />
Memories and Chases.<br />
- Flash buttons on each channel and Assign Master.<br />
- The Hold/Smaster fader can be used for any one of four functions: Assign<br />
Master, Snapshot, Assign Submaster or manual Crossfader.<br />
- Overall controls are provided for: Preset 1 & 2, Flash buttons, DBO, Chase rate<br />
and Grand Master.<br />
▼<br />
1<br />
3<br />
13A Preset faders / Flash buttons<br />
13.10 Controls<br />
13.11 Preset Faders<br />
Diagram 13A 1<br />
There are two rows of Presets faders on the <strong>Event</strong>. The top row of faders is Preset<br />
1 and the bottom row is Preset 2. These faders can be used to smoothly fade a light<br />
to the desired level. The output level produced by the preset faders is dependent on<br />
the level of the Grand Master and the P1 (or P2) Master fader.<br />
Example:<br />
• Bring the Grand Master and P1 Master faders to 10 (100%).<br />
• Move the Channel 1 Preset fader to 100% and you should see the lights<br />
connected to that channel fade up to full level.<br />
• Now fade up Channel 2 to 5 (50%) and check that the lights connected to<br />
Channel 2 are at about 50% level.<br />
• Finally fade the P1 Master down and up to see how it scales the Channel<br />
Preset faders.<br />
13.12 Assign Masters<br />
Diagram 13B 2<br />
2<br />
The Assign Master faders provide a powerful array of features. Underneath each<br />
fader is a Flash button with LED and above the fader is a two line, four character<br />
LCD window. These faders can be used to:<br />
* To control a single Memory<br />
* To control a single Chase<br />
* To control a Stack made up of Memories and / or Chases<br />
▼<br />
3<br />
13B Assign faders / Flash buttons<br />
13.13 Flash Buttons<br />
Diagram 13A, 13B 3<br />
The Flash buttons operate in three ways, depending on the setting of the Add / Solo<br />
master switch:<br />
* Add : The Memory goes to the level set by the Add / Solo Master.<br />
86 <strong>Event</strong> <strong>V3</strong> <strong>Manual</strong>
Change language