Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Managing Memories & Chases<br />
12.30 Infade/Outfade - Adding Fade Times<br />
Fade times can be added to Memories and Chases so that they can then be played<br />
back as part of a Stack with automatic timed crossfades.<br />
12.31 Adding Fade Times to a Memory<br />
Diagram 12G<br />
☞<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
Press the Memory button.<br />
Enter the required Memory number (0 - 999) using the numeric keypad or<br />
alternatively use the (On)/ (Off) button to change the displayed number.<br />
Use the arrow button to move the cursor to the INFADE field.<br />
Enter an Infade time of up to 99 minutes 59 seconds using the numeric<br />
keypad or alternatively use the (On)/ (Off) buttons to change the<br />
existing value.<br />
Use the arrow button to move the cursor to the OUTFDE (Outfade) field.<br />
Enter an Outfade time of up to 99 minutes 59 seconds using the numeric<br />
keypad or alternatively use the (On)/ (Off) buttons to change the<br />
existing value.<br />
Press the Exit button if no more Memories are to be set.<br />
NOTE: Do NOT press the Record button if only entering or changing the fade times.<br />
TIP:<br />
Set a default fade time in Setup:Pref:Time<br />
76 <strong>Event</strong> <strong>V3</strong> <strong>Manual</strong>