Event V3 Operating Manual - Jands

© Jands Electronics July 1995
8.110Adding a Step
☞
Diagram 8M + 8J
To add a Step use the following procedure:
1. Set the ST (Step) field to the Step number that you wish to add.
2. Move the cursor to the ADD field.
3. Press the (On) button.
NOTE: When Step is added it pushes all the old Step which had an equal or higher
number one number higher.
For example, when adding a new first Step set ST to1. The old Step1 will become
Step2 and so on.
Adding the Step does NOT record any levels. After adding the Step either use the
faders or the CH# and AT fields to set the levels and press Record button.
8.120Recording Changes Made in Edit
To save the changes made using Edit press the Record button. It is not necessary to
press the Record button after each channel (or group of channels) is set to a new
level.
E DI
T
C 1
_
C
_
__
1
St
1
O f
1
De
l
O f f
Add
O f f
>
S tor
a g e:
A dd
e d
0% u s ed
, 100%
free
.
_ _ _ _
C 1
S t
1
P res s + to
Add Step
5 - t o Ed
it
E DI
T
C 1
_
C
_
__
1
St
1
O f
0
D e l
O f f
Ad
O
d f f
>
▼
8M Adding a Step
Event V3 Manual 53