Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
© <strong>Jands</strong> Electronics July 1995<br />
4.30 Connecting Desklights<br />
Desklights are available as an optional accessory. Only 12V Littlite or compatible<br />
desklights with 3-pin Cannon XLR type connectors should be used (for wiring see<br />
Appendix B).<br />
4.40 Connecting a VDU<br />
Connect from any Monochrome, CGA, EGA or VGA monitor to the connector on<br />
the option panel. Two video output options are available to suit the above range of<br />
monitors (for wiring see Appendix B).<br />
4.50 Connecting a MIDI Device<br />
The <strong>Event</strong> console is equipped with a MIDI input (there is no through connector).<br />
Use a standard MIDI cable to conect from the MIDI device to the MIDI In connector<br />
on the backpanel (for wiring see Appendix B).<br />
4.60 Connecting a Slave Console<br />
Any <strong>Jands</strong> Stage 12, ESP II or <strong>Event</strong> console can be slaved to the <strong>Event</strong>.<br />
Connect from the DMX output of the slave console to the MIDI input of the main<br />
console. This cable should be wired as detailed (for wiring see Appendix B).<br />
4.70 Turning the Power On<br />
Once all connections have been made the console can be turned on using the mains<br />
power switch located next to the power lead input.<br />
<strong>Event</strong> <strong>V3</strong> <strong>Manual</strong> 17
Change language