Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Features<br />
23.00 Resetting the Console<br />
Reset is used to reset the console and optionally clear all data including Memories,<br />
Chases, Patches and the Password. Reset can be used to quickly erase all data that<br />
has been recorded in an <strong>Event</strong>.<br />
NOTE: It is recommemded that a Deep Clear be performed each time a new show is to<br />
be recorded.<br />
23.10 To Reset the Console<br />
☞<br />
Diagram 23A<br />
Turn power switch off first before resetting the console, then follow the steps<br />
below to reset the console:<br />
1 Hold the DBO, ADD/SOLO MASTER and HOLD buttons down while<br />
turning power on to the console.<br />
2 The menu illustrated in diagram 23A appears on the right hand side LCD<br />
window.<br />
3 Move the cursor to the CONSOLE field.<br />
4 Press the (On) button.<br />
5 Press the RECORD button to confirm the console Reset.<br />
6 If required, enter a Password (up to 6 characters) using the flash buttons.<br />
7 If no Password is required press Exit. All data is now cleared from the<br />
console and all settings revert to the factory set defaults.<br />
136 <strong>Event</strong> <strong>V3</strong> <strong>Manual</strong>
Change language