Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Advanced Features<br />
18.30 Setting Channels to Ignore Flash Button Solo Operation<br />
☞<br />
Diagram 18C<br />
Pressing A Flash button when in Solo mode will cause all other console channels<br />
to “black out”. This can cause unwanted effects on channels controlling moving<br />
lights or colour changers.<br />
To set channels to ignore Solo:<br />
1 Press the Setup button to open the Setup menu.<br />
2 Move the cursor to the UTIL (Utilities) field.<br />
3 Press the (On) button to open the Set Utilities menu.<br />
4 Move the cursor to the SOLO field.<br />
5 Press the (On) button to open the Setup Channel Solo menu.<br />
6 Move the cursor to the CHAN# (Channel) field.<br />
7 Set a channel number.<br />
8 Move the cursor to the THRU (Through) field.<br />
9 Set an end channel number.<br />
Note: If you just want to set one channel, leave this field as same as the CHAN# field.<br />
10<br />
11<br />
12<br />
13<br />
Move the cursor to the SAFETY field.<br />
Set it to ON.<br />
Repeat steps from 2 to 11 for any other channels or groups of channels.<br />
Press Exit to close this menu (press Exit twice to return to the standard<br />
screen).<br />
118 <strong>Event</strong> <strong>V3</strong> <strong>Manual</strong>
Change language