Event V3 Operating Manual - Jands
Event V3 Operating Manual - Jands Event V3 Operating Manual - Jands
Advanced Features Example 1: When shipped from the factory the Event Plus has the EDIT PAGE menu set as described below. The makeup of each Page will be: Example 3: The Increment between the first Memory of each Page can be changed to suit a particular numbering scheme or to allow overlapping Pages. In this case Memories per Page has been set to 20 and the Increment to 100. Chase is on Auto. Page # Assign Faders Control 0 1 - 20 Memories 0 - 19 21 Chase 0 1 1 - 20 Memories 20 - 39 21 Chase 1 2 1 - 20 Memories 40 - 59 21 Chase 2 10 1 - 20 Memories 200 - 219 21 Chase 10 Page # Assign Faders Control 0 1 - 20 Memories 0 - 19 21 Chase 0 1 1 - 20 Memories 100 - 119 21 Chase 1 2 1 - 20 Memories 200 - 229 21 Chase 2 5 1 - 20 Memories 500 - 519 21 Chase 10 Example 2: The Number of Memories can be changed to suit particular applications. A show might call for a number of Stacks and Chases to be permanently set on Assign faders 12 - 24. In this case the operator can set the number of Memories per Page to 10 with an Increment of 10. The Auto Chase load is left on in this example - note that it loads on the next fader after the last memory. Page # Assign Faders Control 0 1 - 10 Memories 0 - 9 11 Chase 0 1 1 - 10 Memories 10 - 19 11 Chase 1 NOTE: If the CHS: field is changed from AUTO to OFF, no Chases are loaded with each Page. 15.42 Restoring the Factory Settings for Page To restore the default settings for EDIT PAGE : 1. Press the Edit button. 2. Press the Page Button. 3. Move cursor to the RESTORE field. 4. Press the (On) button to set the restore function "ON". 5. Press Exit to return to the standard screen. 2 1 - 10 Memories 20 - 29 11 Chase 2 10 1 - 10 Memories 100 - 119 11 Chase 10 108 Event V3 Manual
© Jands Electronics May 1995 15.60 Edit File 15.61 Changing the Default File Settings It is possible to change the way Files work using the Edit File menu. However, this is an advanced feature and will probably not be required by most users. The Edit File menu is used to limit the number of Assign Masters that will be loaded when a new File is loaded. Note: When a File is saved ALL the settings of the Assign Masters are saved. Edit File is only used to limit the number of Assign faders that are updated by loading a File. 1. Press the Edit button then press the File button. 2. With the cursor in the FIRST field, set the Assign Master fader number which will be the first of a group to be loaded with the contents of a File. 3. Move the cursor to the LAST field, set the Assign Master fader number which will be the last of a group to be loaded with the contents of a File. 4. Press the Exit key Example: The operator might want to use the first six memories stored in a file. However, when this file is loaded to the Assign Masters, the remaining 18 Assign Masters are not to be changed. Set the FIRST field to 1 and the LAST field to 6. 15.62 Restoring The Factory Settings for File To restore the default settings for Edit File: 1. Press the Edit button then press the File button. 2. Move the cursor to the RESTORE field. 3. Press the (On) button. 4. Press the Exit key. Event V3 Manual 109
- Page 57 and 58: Managing Memories & Chases © Jands
- Page 59 and 60: © Jands Electronics July 1995 [STA
- Page 61 and 62: © Jands Electronics July 1995 10.0
- Page 63 and 64: © Jands Electronics July 1995 [STA
- Page 65 and 66: © Jands Electronics July 1995 [STA
- Page 67 and 68: © Jands Electronics July 1995 [STA
- Page 69 and 70: © Jands Electronics July 1995 [STA
- Page 71 and 72: © Jands Electronics July 1995 12.0
- Page 73 and 74: © Jands Electronics July 1995 [STA
- Page 75 and 76: © Jands Electronics July 1995 [STA
- Page 77 and 78: © Jands Electronics July 1995 [STA
- Page 79 and 80: © Jands Electronics July 1995 [STA
- Page 81 and 82: © Jands Electronics July 1995 [STA
- Page 83 and 84: © Jands Electronics July 1995 STAR
- Page 85 and 86: © Jands Electronics July 1995 Cont
- Page 87 and 88: © Jands Electronics July 1995 * So
- Page 89 and 90: © Jands Electronics July 1995 1S T
- Page 91 and 92: © Jands Electronics July 1995 2. T
- Page 93 and 94: © Jands Electronics July 1995 [STA
- Page 95 and 96: © Jands Electronics July 1995 14.0
- Page 97 and 98: © Jands Electronics July 1995 [STA
- Page 99 and 100: © Jands Electronics July 1995 14.4
- Page 101 and 102: © Jands Electronics May 1995 Advan
- Page 103 and 104: © Jands Electronics May 1995 15.20
- Page 106 and 107: Advanced Features 15.50 Edit Page 1
- Page 110 and 111: Advanced Features 16.00 Restricting
- Page 112 and 113: Advanced Features 17.10To Record a
- Page 114 and 115: Advanced Features 18.00 Advanced Ch
- Page 116 and 117: Advanced Features 18.20 Setting Cha
- Page 118 and 119: Advanced Features 18.30 Setting Cha
- Page 120 and 121: Advanced Features 19.00 Advanced De
- Page 122 and 123: Advanced Features 19.20 Changing th
- Page 124 and 125: Advanced Features 21.00 Clearing Me
- Page 126 and 127: Advanced Features 21.20 Clearing a
- Page 128 and 129: Advanced Features 21.40 Clearing a
- Page 130 and 131: Advanced Features 22.00 Copying Mem
- Page 132 and 133: Advanced Features 22.20 Copying a C
- Page 134 and 135: Advanced Features 22.30 Copying a P
- Page 136 and 137: Advanced Features 23.00 Resetting t
- Page 138 and 139: Advanced Features 24.00 Connecting
- Page 140 and 141: Advanced Features 26.00 Setting the
- Page 142 and 143: Advanced Features 28.00 Connecting
- Page 144 and 145: Advanced Features 30. 00 Floppy Dis
- Page 146 and 147: General 31.00 Maintenance With care
- Page 148 and 149: General 33.00 Battery Replacement T
- Page 150 and 151: Appendix A A EVENT Setup Menu Struc
- Page 152 and 153: Appendix B B Pin Assignments DMX Di
© <strong>Jands</strong> Electronics May 1995<br />
15.60 Edit File<br />
15.61 Changing the Default File Settings<br />
It is possible to change the way Files work using the Edit File menu.<br />
However, this is an advanced feature and will probably not be required by most<br />
users. The Edit File menu is used to limit the number of Assign Masters that will<br />
be loaded when a new File is loaded.<br />
Note: When a File is saved ALL the settings of the Assign Masters are saved. Edit File<br />
is only used to limit the number of Assign faders that are updated by loading a<br />
File.<br />
1. Press the Edit button then press the File button.<br />
2. With the cursor in the FIRST field, set the Assign Master fader number<br />
which will be the first of a group to be loaded with the contents of a File.<br />
3. Move the cursor to the LAST field, set the Assign Master fader number<br />
which will be the last of a group to be loaded with the contents of a File.<br />
4. Press the Exit key<br />
Example:<br />
The operator might want to use the first six memories stored in a file.<br />
However, when this file is loaded to the Assign Masters, the remaining 18<br />
Assign Masters are not to be changed. Set the FIRST field to 1 and the LAST<br />
field to 6.<br />
15.62 Restoring The Factory Settings for File<br />
To restore the default settings for Edit File:<br />
1. Press the Edit button then press the File button.<br />
2. Move the cursor to the RESTORE field.<br />
3. Press the (On) button.<br />
4. Press the Exit key.<br />
<strong>Event</strong> <strong>V3</strong> <strong>Manual</strong> 109
Change language