Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
© <strong>Jands</strong> Electronics May 1995<br />
15.20 To see the changes in a Built Memory<br />
There are two Methods to see changes in a Built Memory:<br />
METHOD 1<br />
1. Edit the Memory that is being Built from (i.e. in our example the focus<br />
Memory)<br />
2. Assign the Built memory to one of the Assign faders.<br />
NOTE: If the Built Memory is already on an Assign fader just Assign the same Memory<br />
over the top of it.<br />
METHOD 2<br />
1. Load the Page containing the Built memory<br />
NOTE: If the Build Memory is part of the Page on the Assign faders just reload the same<br />
Page.<br />
2. Fade in the Built memory to see the changes.<br />
TIP:<br />
After recording a number of position memories, set them up as a Stack so that<br />
when recording Built Memories you can ‘scroll’ through various position settings.<br />
Colour and Beam information can also be recorded and used in the same way.<br />
<strong>Event</strong> <strong>V3</strong> <strong>Manual</strong> 103
Change language