Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004
Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004 Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004
LOGO!Power LOGO!Power 15 V ■ Overview ■ Application LOGO!Power supplies are primary switched-mode power supplies that are optimized to the LOGO! logic modules in terms of functionality and design. With the wide input range of 85 V to 264 V AC, radio interference level B and assembly option in built-in miniature distribution boards, they can be used universally in a diverse range of applications in the low-end performance range. 13 ■ Technical specifications Power supply, type 15 V/1.9 A 15 V/4 A Order No. 6EP1 351-1SH02 6EP1 352-1SH02 Input Single-phase AC Single-phase AC Rated voltage V in rated 100 to 240 V AC 100 to 240 V AC wide-range input wide-range input Voltage range 85 to 264 V AC 85 to 264 V AC Overvoltage strength 2.3 x V in rated /1.3 ms 2.3 x V in rated /1.3 ms Mains buffering at I out rated > 40 ms at V in = 187 V > 40 ms at V in = 187 V Rated line frequency; range 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz Rated current I in rated 0.63 to 0.33 A 1.24 to 0.68 A Inrush current limitation (+25 °C) < 15 A < 30 A I 2 t < 0.8 A 2 s < 3 A 2 s Integrated line-side fuse Internal Internal Recommended circuit-breaker From 16 A Characteristic B or From 16 A Characteristic B or (IEC 898) in mains supply line from 10 A Characteristic C from 10 A Characteristic C Output Stabilized, floating direct voltage Stabilized, floating direct voltage Rated voltage V out rated 15 V DC 15 V DC Total tolerance, static ± 3 % ± 3 % • Static mains compensation Approx. 0.1 % Approx. 0.1 % • Static load compensation Approx. 1.5 % Approx. 1.5 % Residual ripple < 200 mV pp < 200 mV pp (clock frequency approx. 90 kHz) Spikes (bandwidth approx. 20 MHz) < 300 mV pp < 300 mV pp Setting range 10.5 to 16.1 V 10.5 to 16.1 V Status display Green LED for output voltage Green LED for output voltage OK OK Power ON/OFF behavior No overshoot of V out (soft start) No overshoot of V out (soft start) Starting delay/voltage rise < 0.5 s/typ. 15 ms < 0.5 s/typ. 10 ms Rated current I out rated 1.9 A 4 A Current range up to +55 °C 0 to 1.9 A 0 to 4 A Parallel connection for increased Yes Yes output Continued on page 13/7. 13/6 Siemens KT10.1 · 2004
LOGO!Power LOGO!Power 15 V Power supply, type 15 V/1.9 A 15 V/4 A Order No. 6EP1 351-1SH02 6EP1 352-1SH02 Efficiency Efficiency at V out rated , I out rated typ. 80 % typ. 85 % Power loss at V out rated , I out rated typ. 7 W typ. 11 W Control Dyn. mains compensation < 0.2 % V out < 0.2 % V out (V in rated ± 15 %) Dyn. load compensation ± 2.8 % V out ± 3.3 % V out (I out : 10/90/10 %) Settling time • Load step from 10 to 90 % typ. 20 ms typ. 20 ms • Load step from 90 to 10 % typ. 20 ms typ. 20 ms Protection and monitoring Current limitation typ. 2.7 A typ. 5.0 A Short-circuit protection Stabilized current characteristic Stabilized current characteristic RMS sustained short-circuit current < 4 A < 8 A Overload/short-circuit indicator - - Safety Galvanic isolation primary/secondary Yes, SELV output voltage V out acc. to EN 60950 and EN 50178 Yes, SELV output voltage V out acc. to EN 60950 and EN 50178 Protective class Class II (without PE conductor) Class II (without PE conductor) CE marking Yes Yes UL/cUL (CSA) approval Yes, cULus listed (UL 508, CSA 22.2 No. 14-M95), File E197259; cURus recognized (UL 60950, CSA 22.2 No. 60950), File E151273 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M95), File E197259; cURus recognized (UL 60950, CSA 22.2 No. 60950), File E151273 FM approval Yes, Class I Div. 2, Group A, B, C, D T4 Yes, Class I Div. 2, Group A, B, C, D T4 Appr. for use in marine vessels Yes, GL (Germanischer Lloyd) Yes, GL (Germanischer Lloyd) Degree of protection (EN 60529) IP20 IP20 EMC Interference emission EN 55022 Class B EN 55022 Class B Line harmonics limitation Not applicable Not applicable Interference immunity EN 61000-6-2 EN 61000-6-2 Operating specifications Ambient temperature range -20 to +55 °C with natural convection -20 to +55 °C with natural convection Transportation and storage -40 to +70 °C -40 to +70 °C temperature range Humidity rating Mechanical specifications Mains input connections L1, N Connections •Output + •Output - Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded 2 screw-type terminals each for 0.5 to 2.5 mm 2 2 screw-type terminals each for 0.5 to 2.5 mm 2 Dimensions (W x H x D) in mm 54 x 90 x 55 72 x 90 x 55 Weight Approx. 0.17 kg Approx. 0.25 kg Mounting Snap-mounting on DIN rail EN 50022-35x15/7.5 Snap-mounting on DIN rail EN 50022-35x15/7.5 13 Siemens KT10.1 · 2004 13/7
- Page 43 and 44: SITOP power · Standard 24 V Three-
- Page 45 and 46: SITOP power · Standard 24 V Three-
- Page 47 and 48: SITOP power · Standard 24 V Three-
- Page 49 and 50: SITOP power · Standard 24 V Three-
- Page 51 and 52: SITOP power · Standard 24 V Additi
- Page 53 and 54: SITOP power · Standard 24 V Additi
- Page 55 and 56: SITOP power · Standard 24 V Additi
- Page 57 and 58: SITOP power · Standard 24 V Additi
- Page 59 and 60: SITOP power · Standard 24 V Uninte
- Page 61 and 62: SITOP power · Standard 24 V Uninte
- Page 63 and 64: SITOP power · Standard 24 V Uninte
- Page 65 and 66: SITOP power · Standard 24 V Uninte
- Page 67 and 68: SITOP power · Standard 24 V Uninte
- Page 69 and 70: SITOP power · Standard 24 V Uninte
- Page 71 and 72: SITOP power · Standard 24 V Uninte
- Page 73 and 74: SITOP power · Standard 24 V Uninte
- Page 75 and 76: SITOP power · Standard 24 V Uninte
- Page 77 and 78: SITOP power Alternative voltages 10
- Page 79 and 80: SITOP power Alternative voltages
- Page 81 and 82: SITOP power AS interface power supp
- Page 83 and 84: Power supply, type 2.4 A 7 A Order
- Page 85 and 86: SITOP power Customized 12 12/2 Desc
- Page 87 and 88: SITOP power Customized ■ FAX repl
- Page 89 and 90: LOGO!Power 13 13/2 LOGO!Power 5 V 1
- Page 91 and 92: LOGO!Power LOGO!Power 5 V Power sup
- Page 93: LOGO!Power LOGO!Power 12 V Power su
- Page 97 and 98: LOGO!Power LOGO!Power 24 V Power su
- Page 99 and 100: Technical information and configura
- Page 101 and 102: Technical information and configura
- Page 103 and 104: Technical information and configura
- Page 105 and 106: Technical information and configura
- Page 107 and 108: Technical information and configura
- Page 109 and 110: Technical information and configura
- Page 111 and 112: Technical information and configura
- Page 113 and 114: Technical information and configura
- Page 115 and 116: Technical information and configura
- Page 117 and 118: Technical information and configura
- Page 119 and 120: Technical information and configura
- Page 121 and 122: Dimension drawings 15 SITOP power N
- Page 123 and 124: Dimension drawings SITOP power Sing
- Page 125 and 126: Dimension drawings SITOP power Sing
- Page 127 and 128: Dimension drawings SITOP power Sing
- Page 129 and 130: Dimension drawings SITOP power Addi
- Page 131 and 132: Dimension drawings SITOP power Unin
- Page 133 and 134: Dimension drawings SITOP power Alte
- Page 135 and 136: Dimension drawings LOGO!Power ■ D
- Page 137 and 138: Appendix 16 16/2 SITOP contact pers
- Page 139 and 140: Appendix SITOP contact persons ■
- Page 141 and 142: Appendix SITOP contact persons ■
- Page 143 and 144: Appendix Siemens contacts worldwide
<strong>LOGO</strong>!<strong>Power</strong><br />
<strong>LOGO</strong>!<strong>Power</strong> 15 V<br />
■ Overview<br />
■ Application<br />
<strong>LOGO</strong>!<strong>Power</strong> <strong>supplies</strong> are primary switched-mode <strong>power</strong> <strong>supplies</strong><br />
that are optimized to the <strong>LOGO</strong>! logic modules in terms of<br />
functionality and design. With the wide input range of 85 V to<br />
264 V AC, radio interference level B and assembly option in<br />
built-in miniature distribution boards, they can be used universally<br />
in a diverse range of applications in the low-end performance<br />
range.<br />
13<br />
■ Technical specifications<br />
<strong>Power</strong> supply, type 15 V/1.9 A 15 V/4 A<br />
Order No. 6EP1 351-1SH02 6EP1 352-1SH02<br />
Input Single-phase AC Single-phase AC<br />
Rated voltage V in rated<br />
100 to 240 V AC<br />
100 to 240 V AC<br />
wide-range input<br />
wide-range input<br />
Voltage range 85 to 264 V AC 85 to 264 V AC<br />
Overvoltage strength 2.3 x V in rated /1.3 ms 2.3 x V in rated /1.3 ms<br />
Mains buffering at I out rated > 40 ms at V in = 187 V > 40 ms at V in = 187 V<br />
Rated line frequency; range 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz<br />
Rated current I in rated 0.63 to 0.33 A 1.24 to 0.68 A<br />
Inrush current limitation (+25 °C) < 15 A < 30 A<br />
I 2 t < 0.8 A 2 s < 3 A 2 s<br />
Integrated line-side fuse Internal Internal<br />
Recommended circuit-breaker From 16 A Characteristic B or From 16 A Characteristic B or<br />
(IEC 898) in mains supply line from 10 A Characteristic C<br />
from 10 A Characteristic C<br />
Output Stabilized, floating direct voltage Stabilized, floating direct voltage<br />
Rated voltage V out rated 15 V DC 15 V DC<br />
Total tolerance, static ± 3 % ± 3 %<br />
• Static mains compensation Approx. 0.1 % Approx. 0.1 %<br />
• Static load compensation Approx. 1.5 % Approx. 1.5 %<br />
Residual ripple<br />
< 200 mV pp < 200 mV pp<br />
(clock frequency approx. 90 kHz)<br />
Spikes (bandwidth approx. 20 MHz) < 300 mV pp < 300 mV pp<br />
Setting range 10.5 to 16.1 V 10.5 to 16.1 V<br />
Status display<br />
Green LED for output voltage Green LED for output voltage<br />
OK<br />
OK<br />
<strong>Power</strong> ON/OFF behavior No overshoot of V out (soft start) No overshoot of V out (soft start)<br />
Starting delay/voltage rise < 0.5 s/typ. 15 ms < 0.5 s/typ. 10 ms<br />
Rated current I out rated 1.9 A 4 A<br />
Current range up to +55 °C 0 to 1.9 A 0 to 4 A<br />
Parallel connection for increased Yes<br />
Yes<br />
output<br />
Continued on page 13/7.<br />
13/6<br />
Siemens KT<strong>10.1</strong> · <strong>2004</strong>