Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

SITOP power · Standard 24 V
Additional components
■ Mounting adapter for S7 rail and PS-CPU connecting comb
The single-phase SITOP power supply units 24 V/2 A (6ES7 307-1BA00-0AA0, 6ES7 305-1BA80-0AA0 ), 24 V/5 A (6ES7 307-1EA00-
0AA0, 6ES7 307-1EA80-0AA0) and 24 V/10 A (6ES7 307-1KA01-0AA0) are special mechanical versions for SIMATIC S7-300.
They can be mounted on an S7 rail, and the connection to the new CPUs or the compact CPUs of the S7-300 can be established
without problem using a supplied connecting comb.
Power supply units of same design without connecting comb, but with a supplied mounting adapter for DIN rail EN 50022-35x15,
are available with the Order Nos. 6EP1 331-1SL11 (24 V/2 A), 6EP1 333-1SL11 (24 V/5 A) and 6EP1 334-1SL12 (24 V/10 A).
A connecting comb for older CPUs with product phase-out since 2003 as well as the mounting adapter are available as individual
accessories.
■ Selection and Ordering Data
PS-CPU connecting comb 6ES7 390-7BA00-0AA0
(spare part for CPUs 313, 314,
315, 315/316/318-2 DP, IM153)
Mounting adapter for DIN rail 6ES7 390-6BA00-0AA0
EN 50022-35x15
■ IP65 connector seals
The single-phase SITOP power supply unit 24 V/10 A in IP65 degree of protection (6EP1 334-2CA00) has a design and functionality
which are optimally adapted to the ET 200X distributed I/O system.
Thanks to integral plug-in connectors, it can be flush-mounted with the modules without any special wiring overhead.
If the power supply unit is operated outside the ET 200X system as a stand-alone power supply unit in IP65 degree of protection,
connector seals are required to seal the integral plug-in connectors.
8
■ Selection and Ordering Data
IP65 connector seal
for power supply unit
6EP1 334-2CA00
6EP1 971-2CA00
■ Circular input connectors and AS interface coupling module PG
A 6-pole circular connector with socket inset is required for the ASi power supply 30 V/2.4 A in IP65 degree of protection
(6EP1 632-1AL01) for connection of the input side.
The connection of the ASi power supply to the ASi network is made using the coupling module PG.
■ Selection and Ordering Data
6-pole circular input connector
with socket inset
AS interface coupling module
PG
6ES5 760-2CA11
3RG9 220-0AA00
Siemens KT10.1 · 2004 8/7