Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004
Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004 Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004
SITOP power · Standard 24 V Three-phase Output currents 10 A to 40 A Power supply, type 10 A 20 A Order No. 6EP1 434-2BA00 6EP1 436-2BA00 Efficiency Efficiency at V out rated , I out rated Approx. 89 % Approx. 89 % Power loss at V out rated , I out rated Approx. 30 W Approx. 59 W Control Dyn. mains compensation < 1 % V out < 1 % V out (V in rated ± 15 %) Dyn. load compensation (I out : 50/100/50 %) ± 2 % V out ± 2 % V out Settling time • Load step from 50 to 100 % < 2 ms < 2 ms • Load step from 100 to 50 % < 2 ms < 2 ms Protection and monitoring Output overvoltage protection Yes, acc. to EN 60950 Yes, acc. to EN 60950 Current limitation typ. 10.5 to 13 A typ. 21 to 26 A Short-circuit protection Stabilized current characteristic down to 0 V Stabilized current characteristic down to 0 V 7 RMS sustained short-circuit current < 20 A < 30 A Overload/short-circuit indicator - - Safety Galvanic isolation primary/secondary Yes, SELV output voltage V out acc. to EN 60950 Protective class Class I Class I Discharge current < 0.35 mA (550 V/60 Hz) < 0.35 mA (550 V/60 Hz) Yes, SELV output voltage V out acc. to EN 60950 TÜV test Yes; CB scheme Yes; CB scheme CE marking Yes Yes UL/cUL (CSA) approval Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 FM approval - - Appr. for use in marine vessels - - Degree of protection (EN 60529) IP20 IP20 EMC Interference emission EN 55022 Class B EN 55022 Class B Line harmonics limitation EN 61000-3-2 EN 61000-3-2 Interference immunity EN 61000-6-2 EN 61000-6-2 Operating specifications Ambient temperature range Transportation and storage temperature range Humidity rating Mechanical specifications Connections • Mains input L1, L2, L3, PE • Output L+ • Output M 0 to +55 °C with natural convection 0 to +55 °C with natural convection -25 to +85 °C -25 to +85 °C Climatic class 3K3 acc. to EN 60721, no condensation Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded core/finely stranded for 0.5 to 2.5 mm 2 single- 1 screw-type terminal for 1 screw-type terminal for 0.33 to 10 mm 2 0.33 to 10 mm 2 2 screw-type terminals for 2 screw-type terminals for 0.33 to 10 mm 2 0.33 to 10 mm 2 Dimensions (W x H x D) in mm 280 x 125 x 92 280 x 125 x 92 Weight approx. 2 kg 2 kg Mounting Snap-mounting on DIN rail EN 50022-35x15/7.5 Snap-mounting on DIN rail EN 50022-35x15/7.5 Accessories Mounting bracket 90° (6EP1971-2BA00) Mounting bracket 90° (6EP1971-2BA00) 7/8 Siemens KT10.1 · 2004
SITOP power · Standard 24 V Three-phase Output currents 10 A to 40 A 30 A 40 A 6EP1 437-2BA00 6EP1 437-2BA10 Approx. 90 % Approx. 90 % Approx. 80 W Approx. 107 W < 1 % V out < 1 % V out -4 %, +2 % V out -4 %, +2 % V out < 3 ms < 3 ms < 3 ms < 3 ms Yes, acc. to EN 60950 Yes, acc. to EN 60950 typ. 31.5 to 39 A typ. 42 to 52 A Electronic shutdown, automatic restart Electronic shutdown, automatic restart < 48 A < 62 A - - Yes, SELV output voltage V out acc. to EN 60950 Yes, SELV output voltage V out acc. to EN 60950 Class I Class I < 0.78 mA (550 V/60 Hz) < 0.78 mA (550 V/60 Hz) Yes; CB scheme Yes; CB scheme Yes Yes Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 Yes, cULus listed (UL 508, CSA 22.2 No. 14-M91), File E143289 - - - - IP20 IP20 7 EN 55022 Class B EN 55022 Class B EN 61000-3-2 EN 61000-3-2 EN 61000-6-2 EN 61000-6-2 0 to +55 °C with natural convection 0 to +55 °C with natural convection -25 to +85 °C -25 to +85 °C Climatic class 3K3 acc. to EN 60721, no condensation Climatic class 3K3 acc. to EN 60721, no condensation One screw-type terminal each One screw-type terminal each for 0.5 to 2.5 mm 2 singlecore/finely stranded core/finely stranded for 0.5 to 2.5 mm 2 single- 1 screw-type terminal for 1 screw-type terminal for 0.33 to 10 mm 2 0.33 to 10 mm 2 2 screw-type terminals for 2 screw-type terminals for 0.33 to 10 mm 2 0.33 to 10 mm 2 280 x 180 x 92 280 x 180 x 92 3.6 kg 3.6 kg Snap-mounting on DIN rail EN 50022-35x15/7.5 Mounting bracket 90° (6EP1971-2BA00) Snap-mounting on DIN rail EN 50022-35x15/7.5 Mounting bracket 90° (6EP1971-2BA00) Siemens KT10.1 · 2004 7/9
- Page 1 and 2: Catalog KT 10.1 • 2004 SITOP Powe
- Page 3 and 4: SITOP Power supplies SITOP power LO
- Page 5 and 6: Siemens KT10.1 · 2004 1/3
- Page 7 and 8: and production areas to shipping. T
- Page 9 and 10: SITOP power Introduction Overview o
- Page 11 and 12: SITOP power 1 Selection guide In or
- Page 13 and 14: SITOP power · Standard 24 V Single
- Page 15 and 16: SITOP power · Standard 24 V Single
- Page 17 and 18: SITOP power · Standard 24 V Single
- Page 19 and 20: SITOP power · Standard 24 V Single
- Page 21 and 22: SITOP power · Standard 24 V Single
- Page 23 and 24: SITOP power · Standard 24 V Single
- Page 25 and 26: SITOP power · Standard 24 V Single
- Page 27 and 28: SITOP power · Standard 24 V Single
- Page 29 and 30: SITOP power · Standard 24 V Single
- Page 31 and 32: SITOP power · Standard 24 V Single
- Page 33 and 34: SITOP power · Standard 24 V Single
- Page 35 and 36: SITOP power · Standard 24 V Single
- Page 37 and 38: SITOP power · Standard 24 V Single
- Page 39 and 40: SITOP power · Standard 24 V Single
- Page 41 and 42: SITOP power · Standard 24 V Three-
- Page 43 and 44: SITOP power · Standard 24 V Three-
- Page 45 and 46: SITOP power · Standard 24 V Three-
- Page 47: SITOP power · Standard 24 V Three-
- Page 51 and 52: SITOP power · Standard 24 V Additi
- Page 53 and 54: SITOP power · Standard 24 V Additi
- Page 55 and 56: SITOP power · Standard 24 V Additi
- Page 57 and 58: SITOP power · Standard 24 V Additi
- Page 59 and 60: SITOP power · Standard 24 V Uninte
- Page 61 and 62: SITOP power · Standard 24 V Uninte
- Page 63 and 64: SITOP power · Standard 24 V Uninte
- Page 65 and 66: SITOP power · Standard 24 V Uninte
- Page 67 and 68: SITOP power · Standard 24 V Uninte
- Page 69 and 70: SITOP power · Standard 24 V Uninte
- Page 71 and 72: SITOP power · Standard 24 V Uninte
- Page 73 and 74: SITOP power · Standard 24 V Uninte
- Page 75 and 76: SITOP power · Standard 24 V Uninte
- Page 77 and 78: SITOP power Alternative voltages 10
- Page 79 and 80: SITOP power Alternative voltages
- Page 81 and 82: SITOP power AS interface power supp
- Page 83 and 84: Power supply, type 2.4 A 7 A Order
- Page 85 and 86: SITOP power Customized 12 12/2 Desc
- Page 87 and 88: SITOP power Customized ■ FAX repl
- Page 89 and 90: LOGO!Power 13 13/2 LOGO!Power 5 V 1
- Page 91 and 92: LOGO!Power LOGO!Power 5 V Power sup
- Page 93 and 94: LOGO!Power LOGO!Power 12 V Power su
- Page 95 and 96: LOGO!Power LOGO!Power 15 V Power su
- Page 97 and 98: LOGO!Power LOGO!Power 24 V Power su
<strong>SITOP</strong> <strong>power</strong> · Standard 24 V<br />
Three-phase<br />
Output currents 10 A to 40 A<br />
<strong>Power</strong> supply, type 10 A 20 A<br />
Order No. 6EP1 434-2BA00 6EP1 436-2BA00<br />
Efficiency<br />
Efficiency at V out rated , I out rated Approx. 89 % Approx. 89 %<br />
<strong>Power</strong> loss at V out rated , I out rated Approx. 30 W Approx. 59 W<br />
Control<br />
Dyn. mains compensation<br />
< 1 % V out < 1 % V out<br />
(V in rated ± 15 %)<br />
Dyn. load compensation<br />
(I out : 50/100/50 %)<br />
± 2 % V out ± 2 % V out<br />
Settling time<br />
• Load step from 50 to 100 % < 2 ms < 2 ms<br />
• Load step from 100 to 50 % < 2 ms < 2 ms<br />
Protection and monitoring<br />
Output overvoltage protection Yes, acc. to EN 60950 Yes, acc. to EN 60950<br />
Current limitation typ. 10.5 to 13 A typ. 21 to 26 A<br />
Short-circuit protection<br />
Stabilized current characteristic<br />
down to 0 V<br />
Stabilized current characteristic<br />
down to 0 V<br />
7<br />
RMS sustained short-circuit current < 20 A < 30 A<br />
Overload/short-circuit indicator - -<br />
Safety<br />
Galvanic isolation<br />
primary/secondary<br />
Yes, SELV output voltage V out<br />
acc. to EN 60950<br />
Protective class Class I Class I<br />
Discharge current < 0.35 mA (550 V/60 Hz) < 0.35 mA (550 V/60 Hz)<br />
Yes, SELV output voltage V out<br />
acc. to EN 60950<br />
TÜV test Yes; CB scheme Yes; CB scheme<br />
CE marking Yes Yes<br />
UL/cUL (CSA) approval<br />
Yes, cULus listed (UL 508, CSA<br />
22.2 No. 14-M91), File E143289<br />
Yes, cULus listed (UL 508, CSA<br />
22.2 No. 14-M91), File E143289<br />
FM approval - -<br />
Appr. for use in marine vessels - -<br />
Degree of protection (EN 60529) IP20 IP20<br />
EMC<br />
Interference emission EN 55022 Class B EN 55022 Class B<br />
Line harmonics limitation EN 61000-3-2 EN 61000-3-2<br />
Interference immunity EN 61000-6-2 EN 61000-6-2<br />
Operating specifications<br />
Ambient temperature range<br />
Transportation and storage<br />
temperature range<br />
Humidity rating<br />
Mechanical specifications<br />
Connections<br />
• Mains input L1, L2, L3, PE<br />
• Output L+<br />
• Output M<br />
0 to +55 °C with natural<br />
convection<br />
0 to +55 °C with natural<br />
convection<br />
-25 to +85 °C -25 to +85 °C<br />
Climatic class 3K3 acc. to<br />
EN 60721, no condensation<br />
Climatic class 3K3 acc. to<br />
EN 60721, no condensation<br />
One screw-type terminal each One screw-type terminal each<br />
for 0.5 to 2.5 mm 2 singlecore/finely<br />
stranded<br />
core/finely stranded<br />
for 0.5 to 2.5 mm 2 single-<br />
1 screw-type terminal for<br />
1 screw-type terminal for<br />
0.33 to 10 mm 2 0.33 to 10 mm 2<br />
2 screw-type terminals for<br />
2 screw-type terminals for<br />
0.33 to 10 mm 2 0.33 to 10 mm 2<br />
Dimensions (W x H x D) in mm 280 x 125 x 92 280 x 125 x 92<br />
Weight approx. 2 kg 2 kg<br />
Mounting<br />
Snap-mounting on DIN rail<br />
EN 50022-35x15/7.5<br />
Snap-mounting on DIN rail<br />
EN 50022-35x15/7.5<br />
Accessories Mounting bracket 90°<br />
(6EP1971-2BA00)<br />
Mounting bracket 90°<br />
(6EP1971-2BA00)<br />
7/8<br />
Siemens KT<strong>10.1</strong> · <strong>2004</strong>