Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

SITOP power · Standard 24 V
Single-phase and two-phase
Output currents 20 A and 40 A
The proven type The two-phase version
The tried and tested power
supply unit with selectable input
voltage range for supplying
all standard applications
in automation engineering.
The power supply unit with
2-phase wide-range input for
widely changing power supply
networks (> 550 V) as well
as industrial networks in
Canada and the USA.
6
20 A 20 A
6EP1 336-2BA00
6EP1 536-2AA00
Single-phase AC
120/230 V AC
Settable using wire jumper
Two-phase AC
500 to 600 V 2 AC
wide-range input
93 to 132/187 to 264 V AC 420 to 682 V 2 AC
2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms
> 10 ms at V in = 93/187 V 6/30 ms at V in = 420/600 V
50/60 Hz, 47 to 63 Hz 50/60 Hz; 47 to 63 Hz
8.0/3.3 A 1.82 A (at 420 V)
< 81 A typ. 25 A
< 8 A 2 s < 1.0 A 2 s
T 10 A (not accessible)
none
Circuit-breaker from 16 A
Characteristic C
Required: 2-pole coupled circuit-breaker
Char. C max. 10 A
or motor circuit-breaker
3RV1021-1DA10, setting 3 A
Stabilized, floating direct voltage Stabilized, floating direct voltage
24 V DC 24 V DC
±3% ±3%
< 150 mV pp < 150 mV pp
< 240 mV pp < 240 mV pp
22.8 to 26.4 V 1) 22.8 to 28.8 V 2)
Green LED for 24 V O.K.
Green LED for 24 V O.K.
No overshoot of V out
(soft start)
Small overshoot of V out (< 2 V for
max. 500 ms)
< 3 s/typ. 80 ms -
20 A 20 A
0 to 20 A 0 to 20 A
0 to 20 A (55 °C) 0 to 20 A
Approx. 20 A constant current Approx. 25 A constant current
Approx. 20 A constant current Approx. 28 A constant current
Yes, 2 1) Yes, 2 2)
Continued on page 6/5.
1) Only permissible with ambient temperature from 0 to 45 °C.
2) Only permissible with ambient temperature from 0 to 50 °C.
Siemens KT10.1 · 2004 6/3