Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

SITOP power · Standard 24 V
Single-phase and two-phase
Output current 5 A
■ Overview SITOP modular The proven types
4
■ Application
The modular power supply
unit with single-phase and
two-phase wide-range inputs
for global use in many different
fields of application; expansion
of functions possible
using add-on modules.
The tried and tested power supply unit with selectable input voltage
range for supplying all standard applications in automation
engineering; 6EP1333-2AA00 without limitation of input current
harmonics.
■ Technical specifications
Power supply, type 5 A 5 A 5 A
Order No. 6EP1 333-3BA00 6EP1 333-2BA00 6EP1 333-2AA00
Input Single and two-phase AC Single-phase AC Single-phase AC
Rated voltage V in rated
120/230 to 500 V AC
120/230 V AC
120/230 V AC
Settable via selector switch on Settable using wire jumper
Settable using wire jumper
device
Voltage range 85 to 132 V/176 to 550 V AC 93 to 132 V/187 to 264 V AC 93 to 132 V/187 to 264 V AC
Overvoltage strength 1300 V peak , 1.3 ms 2.3 x V in rated , 1.3 ms 2.3 x V in rated , 1.3 ms
Mains buffering at I out rated > 25 ms at V in = 120/230 V > 10 ms at V in = 93/187 V > 20 ms at V in = 93/187 V
Rated line frequency; range 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz 50/60 Hz; 47 to 63 Hz
Rated current I in rated 2.2 /1.2 to 0.61 A 2.2/0.9 A 2.2/1.3 A
Inrush current limitation (+25 °C) < 35 A < 32 A, typ. 3 ms < 32 A, typ. 3 ms
I 2 t < 1.7 A 2 s < 0.8 A 2 s < 0.8 A 2 s
Integrated line-side fuse T 3, 15 A (not accessible) T 3.15 A/250 V (not accessible) T 3.15 A/250 V (not accessible)
Recommended circuit-breaker
From 6 A, Characteristic C
From 6 A, Characteristic C
(IEC 898) in mains supply line
Continued on page 4/4.
From 6 A (10 A) Characteristic C
(B); with two-phase operation:
circuit-breaker with two-pole
connection or motor circuitbreaker
3RV1021-1EA10
Output Stabilized, floating direct voltage Stabilized, floating direct voltage Stabilized, floating direct voltage
Rated voltage V out rated 24 V DC 24 V DC 24 V DC
Total tolerance ± 3 % ± 3 % ± 3 %
• Stat. mains compensation Approx. 0.1 % Approx. 0.1 % Approx. 0.1 %
• Stat. load compensation Approx. 0.1 % Approx. 0.2 % Approx. 0.2 %
Residual ripple (clock frequency: < 50 mV pp (typ. 10 mV pp ) < 150 mV pp < 150 mV pp
approx. 50 kHz)
Spikes (bandwidth: 20 MHz) < 200 mV pp (typ. 20 mV pp ) < 240 mV pp < 240 mV pp
Setting range 24 to 28.8 V (max. 120 W) 22.8 to 26.4 V 22.8 to 26.4 V
Status display Green LED for 24 V O.K. Green LED for 24 V O.K. Green LED for 24 V O.K.
Power ON/OFF behavior Overshoot of V out approx. 3 % No overshoot of V out (soft start) No overshoot of V out (soft start)
Starting delay/voltage rise < 1 s/< 50 ms < 3 s/typ. 80 ms < 3 s/typ. 80 ms
Rated current I out rated 5 A 5 A 5 A
Current range
• Up to +45 °C 0 to 5 A 0 to 5 A 0 to 5 A
• Up to +60 °C 0 to 5 A 0 to 5 A 0 to 5 A
Dyn. V/I with
• Starting on short circuit
Approx. 5.5 A constant current
• Short-circuit in operation typ. 15 A for 25 ms typ. 20 A for 350 ms typ. 20 A for 350 ms
Parallel connection for increased
output
Yes, 2 (selectable current characteristic)
Yes, 2 Yes, 2
4/2
Siemens KT10.1 · 2004