Power supplies SITOP power LOGO!Power Catalog K T 10.1 2004

Technical information and configuration
■ Miniature circuit-breakers in 24 V DC circuits which are powered by SITOP power supply units
Fusing of the output circuit 24 V DC,
selectivity
Technical specifications
Type 5 A 10 A
Order No. 6EP1 333-3BA00 6EP1 334-3BA00
Input Single-phase, two-phase Single-phase, two-phase
Rated voltage V in rated 120/230-500 V AC 120/230-500 V AC
Output Stabilized, floating direct voltage Stabilized, floating direct voltage
Rated voltage V out rated 24 V DC 24 V DC
Rated current I out rated 5 A 10 A
Dyn. V/I with short-circuit in operation, typ. 15 A for 25 ms 30 A for 25 ms
Tripping of output m.c.b
The following are approximately available for selective tripping in practice
SITOP, dyn. V/I - 50% I out rated , typ. 12.5 A for 25 ms 25 A for 25 ms
CBs to IEC 898, type 5SY4 1.., selectively
trippable in approx. 12 ms
1 A Type A (trips at 5 A DC after typ. 12 ms)
- 1 A Type C (trips at 14 A DC after typ. 12 ms)
1.6 A Type A (trips at 8 A DC after typ. 12 ms)
- 1.6 A Type C (trips at 22.4 A DC after typ. 12 ms)
2 A Type A (trips at 10 A DC after typ. 12 ms)
- 3 A Type A (trips at 15 A DC after typ. 12 ms)
- 4 A Type A (trips at 20 A DC after typ. 12 ms)
Siemens CB terminals, Type 8WA1 011..., 2 A Order No. 8WA1 011-1SF25 (trips at 7.6 A DC after max. 12 ms)
selectively trippable in approx. 12 ms
- 4 A Order No. 8WA1 011-1SF26 (trips at
15.2 A DC after max. 12 ms)
- 6 A Order No. 8WA1 011-1SF27 (trips at
22.8 A DC after max. 12 ms)
in 20 ms
4 A Order No. 8WA1 011-1SF26 (trips at
10.7 A DC after max. 20 ms)
-
14
Siemens KT10.1 · 2004 14/19