Introduction åè¨Maintenance Manual & Parts ... - Powertoys

More documents

Recommendations

Info

STEP7 Shock Absorber 1 2.5mm E-Clips E 8 1 3 2 Attach the shock eyelet onto the shock shaft until it reaches the mark line on the shaft. 2 Shock Eyelet 4 1 3 8 4 or 5 3 2.8x1.9 mm O-Ring O 4 Shock Shaft 5 Shock Shaft 2 2 Cover the shaft with cloth before griping it with pliers. X2 Front x2 2 X2 Rear x2 2 silicon oil Piston Pull down the piston and slowlly fill in the silicon oil. The factory set-up of the shock is #500 of silicon oil for the front and rear shock absorbers. #500 Then gently move the shaft/piston up and down to get rid of the bubbles. Add silicon oil one more time up to the brim. Put the shock bladder onto the shock body, wipe off excess oil and tighten the shock cap. X4 Ensure the piston moves smoothly X2 Front x2 2 Rear x2 2 1mm 2mm 4mm 6mm Use 6 mm preload spacer for front. Use 8 mm preloadd spacer for rear. 6mm Compress the spring an d install spring cup. X4 Hint Apply silicon oil X2 X4 Assemble as many times as specified 10
STEP7 Shock Absorber Front Shock Absorbers Rear Shock Absorbers 11
Page 1 and 2: 1/10 SCALE BRUSHLESS POWERED RACING
Page 3 and 4: Manual Format How to read the inst
Page 7: STEP4 Rear Suspension Rear Shock T
Page 14: STEP11 Steering Servo 1 3x10mm F/H
Page 18: STEP17 Tire/Wheels 1 4x12mm Socket
Page 24: SPARROWHAWK XXB PARTS (2) (2) (2)
Page 32: WHEEL & TIRE OPTION PARTS LIST  (

Introduction åè¨Maintenance Manual & Parts ... - Powertoys

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?

Introduction åè¨Maintenance Manual & Parts ... - Powertoys