pdf brochure - Alois Pöttinger Maschinenfabrik GmbH
pdf brochure - Alois Pöttinger Maschinenfabrik GmbH pdf brochure - Alois Pöttinger Maschinenfabrik GmbH
Pöttinger HIT Tedder 97+021.02.0911
- Page 2 and 3: Quality requirements are growing Sa
- Page 4 and 5: High quality standards of manufactu
- Page 6 and 7: HIT - Tedder 4WD transmission Profe
- Page 8 and 9: HIT - Tedder HIT 810 NZ Models up t
- Page 10 and 11: 4-rotor tedder HIT 540 N 10
- Page 12 and 13: 6-rotor tedder HIT 610 NZ HIT 690 N
- Page 14 and 15: 8-rotor tedder HIT 910 NZ HIT 910 N
- Page 16 and 17: HIT 910 AZ 8-rotor tedder
- Page 18 and 19: Tedders with 4 and 6 rotors Farmers
- Page 20 and 21: Tedders with 8 rotors Expectations
- Page 22 and 23: Options HIT Tyres Tyres Additional
- Page 24: Quality for the future Machines wit
Pöttinger HIT<br />
Tedder<br />
97+021.02.0911
Quality requirements are growing<br />
Safe future, quality-oriented and<br />
productive – the key essentials of modern<br />
agriculture.<br />
It is not enough to just produce agricultural<br />
technology, we have to meet the requirements<br />
of today's farmers. That is a<br />
challenge demanding a will to experiment<br />
and the ability to think freely. Thinking the<br />
same way as you.<br />
Quality green forage is the basis for high<br />
milk yield and meat production. The way in<br />
which technology is implemented is a<br />
deciding factor in bringing in a successful<br />
harvest. While developing our latest<br />
generation of tedders we have been aiming<br />
for high productivity and excellent working<br />
quality. The objective is to harvest the<br />
highest quality forage in the shortest<br />
possible time at minimum cost.<br />
To achieve this objective, we have kitted our<br />
tedders out with new tine mountings, jockey<br />
wheels and shock absorber struts. Go<br />
ahead and compare – the difference is clear.<br />
That is why we invite you to join Pöttinger –<br />
and work together towards a successful<br />
future!<br />
2
Pages 4 – 5<br />
Technical details<br />
Pages 14 – 17<br />
8-rotor tedder<br />
Pages 6 – 7<br />
Mountings – Transmission – Tines<br />
Pages 8 – 9<br />
Ground hugging – Fenceline tedding –<br />
Transport<br />
Pages 10 – 11<br />
4-rotor tedder<br />
Seite 18 – 19<br />
Technical Data<br />
Tedders with 4 and 6 rotors<br />
Seite 20 – 21<br />
Technical Data<br />
Tedders with 8 rotors<br />
Seite 22 – 23<br />
Options<br />
Pages 12 – 13<br />
6-rotor tedder<br />
Seite 24<br />
Imprint<br />
3
High quality standards of manufacture guarantee a long<br />
service life. The Pöttinger tedder range is packed with<br />
modern precision engineering. Globular iron castings,<br />
solid steel components, heavy duty rotary joints and top<br />
quality paintwork speak for themselves. Distinctive<br />
colours and modern design make our tedders look<br />
good too.<br />
You can be sure that Pöttinger implements command a<br />
high resale value. Look for the details – we would like to<br />
help you in reaching a decision.<br />
Heavy duty tines<br />
Losing tines during tedding is not just annoying, it also puts animals and<br />
following harvesting machinery at risk.<br />
The heavy duty tine with a long service life<br />
The newly developed "Heavy Duty" tine ensures reliability. The curved shape<br />
of the mounting supports the tine, making it more effective and harder<br />
wearing. Benefits: the tines are much more durable and need to be replaced<br />
less often. The tine security system is integrated into the holder.<br />
The unequal lengths of the tines make a significant contribution to improving<br />
the spreading quality and extending the service life. In addition, this is very<br />
important in ensuring clean forage.<br />
<br />
<br />
<br />
4
Details with Smart Engineering<br />
New safety guard<br />
brackets<br />
The robustness of the<br />
machines is further<br />
enhanced by new,<br />
clamped and reinforced<br />
safety guard brackets.<br />
Pöttinger’s high<br />
standard of workman -<br />
ship is also extremely<br />
important in the tedders.<br />
Rigid frame tube<br />
Welds seams can be<br />
weak points. The frame<br />
tubes (tube dimensions<br />
2.76 x 0.28’ / 70 x 7 mm)<br />
on HIT tedders are weldfree<br />
and pressed onto<br />
castings for a<br />
permanent fit.<br />
Heavy duty frame<br />
hinges with replaceable<br />
bushes.<br />
High quality paintwork<br />
Powder-coated paintwork<br />
has proven flexi -<br />
bility and durability in<br />
the field. Surfaces can<br />
be retouched without<br />
the paint flaking away –<br />
true automotive quality.<br />
Pöttinger brings you<br />
smart-looking designs<br />
and distinctive colours.<br />
Large flotation tyres<br />
6-PR flotation tyres<br />
ensure smooth running<br />
and protect the sward,<br />
even over bumpy<br />
ground. All wheels are<br />
fitted with anti-wrap<br />
guards as standard.<br />
Support disc<br />
Each rotor features an<br />
additional support plate<br />
to increase the stability<br />
of the tine arm mountings.<br />
This ensures the<br />
arms cannot twist, even<br />
in a really heavy crop.<br />
Tine arms made of<br />
flat bar<br />
Solid bars ensure that<br />
fittings remain in<br />
place more securely.<br />
5
HIT – Tedder<br />
4WD transmission<br />
Professionals look for positive power transmission and heavy<br />
duty design. This driveline features smart-engineered details<br />
that put the Pöttinger range of tedders up front.<br />
No power should be lost in the driveline. The heavy duty HIT-<br />
Tech double c.v. joints are similar to those on a tractor's front<br />
half-shafts. Each rotor can move freely under full power in<br />
every position. Ultimate ground hugging is guaranteed, even<br />
on slopes and rough ground.<br />
6
Mountings – Transmission – Service life<br />
Tedders from Pöttinger are<br />
well-known for their short<br />
headstock. The centre of<br />
gravity is located closer to<br />
Anbauvarianten<br />
HIT N<br />
HIT H<br />
HIT A (option:<br />
470, 540)<br />
the tractor, reducing the<br />
power requirement of the<br />
tractor and increasing<br />
HIT 800 AZ, 900 A / AZ<br />
driving safety.<br />
Pivoting headstock Rigid hitch mounting Trailed mounting<br />
Well thought out stabilization<br />
Pivoting headstock with heart-shaped pivot pin retainer<br />
Perfect cornering with the tedder following in the tractor's tracks. The shock<br />
absorbing struts provide additional stability with spring-loaded cylinders<br />
compensating for turning movement.<br />
When lifted the tedder swings into the central position. Even on slopes the tedder<br />
cannot under-run, it follows the tractor faithfully.<br />
Pin interlock – to prevent freedom of movement for road transport – just relocate<br />
the locking pin.<br />
Stabilizing shock absorbers<br />
Double-acting shock absorbing struts on both sides<br />
ensure the tedder remains centred, even on slopes.<br />
The struts stabilise the machine when it is lifted and<br />
during transport on the road. Even at high travelling<br />
speeds the machine is prevented from bouncing.<br />
Standard equipment on HIT 690 N/NZ, 800 NZ,<br />
810 N/NZ and 910 NZ. As an option for HIT 470 N,<br />
540 N and 610 N/NZ (varies from country to country).<br />
7
HIT – Tedder<br />
HIT 810 NZ<br />
Models up to and including HIT 540 N have<br />
rotors that rotate inwards to save space<br />
during transport and parking.<br />
From HIT 470 the „Hydrokomfort“ pivoting<br />
system raises the outer rotors.<br />
Also available for ALPINHIT 44 on option.<br />
HIT 690 NZ – Hydrokomfort<br />
HIT 80 A– Transport<br />
HIT 540 N – Transport<br />
8
The right angle for a clean crop<br />
Clean forage is the number<br />
one aim of the harvesting<br />
process. Fewer germs and<br />
lower ash content in the<br />
silage means healthier<br />
animals and higher meat<br />
and milk yield. The optimum<br />
rotor position must be easy<br />
to adjust effectively.<br />
Rotor tracking<br />
Jockey wheel for<br />
optimum ground tracking<br />
and sward protection<br />
The additional jockey<br />
wheel on the headstock is<br />
ideal for guiding the tines<br />
over the ground. A chaintype<br />
top link is used instead of a rigid top link. The jockey wheel ensures that the<br />
working depth is always set correctly. Moreover, this top-of-the-range version<br />
guarantees high-speed working, resulting in higher coverage.<br />
No tools are required to adjust the height of the jockey wheel. Wrapping is<br />
prevented reliably by an extra guard cover – even in high quantities of crop.<br />
Fenceline tedding<br />
<br />
<br />
Adjust manually<br />
ALPINHIT 44 N, 470 N,<br />
540 N, 610 N, 690 N,<br />
810 N and 910 N.<br />
Rigid rotor angle<br />
adjustment<br />
Fine tooth meshing<br />
allows the rotor angle to<br />
be adjus ted in seven<br />
stages of one degree<br />
each – adaptable to<br />
different forage types and<br />
quantities.<br />
(not available on 440 H<br />
and 470 H).<br />
Mechanical fenceline<br />
adjustment (HIT NZ<br />
models) – operated from<br />
the tractor seat by lanyard.<br />
Hydraulic fenceline<br />
adjustment (standard on<br />
AZ models) – operated<br />
by single-acting<br />
hydraulic cylinder with<br />
gas accumulator.<br />
Setting the wheels at an angle causes the tedder to<br />
run diagonally so the forage is not flung onto<br />
neighbouring fields or crops. This can also be used<br />
to prevent the tedder drifting downhill when working<br />
across really steep slopes. The wheel can be<br />
adjusted to the left or right.<br />
9
4-rotor tedder<br />
HIT 540 N<br />
10
for all locations ...<br />
The increased specifi -<br />
cations required by small to<br />
medium-sized businesses<br />
are met by this 4-rotor<br />
machine.<br />
Designed to work on really<br />
steep slopes in addition to<br />
normal ground, these<br />
tedders have a short<br />
headstock and small<br />
diameter rotors. Compact<br />
engineering – working<br />
widths from 13.12 to 17.06 ft<br />
/ 4.0 to 5.20 m (DIN).<br />
HIT 470 N<br />
470 N – working width 14.44 ft / 4.40 m (DIN)<br />
This 4-rotor tedder features 6 tine arms per rotor and hydraulic action.<br />
540 N – working width 17.06 ft / 5.20 m (DIN)<br />
The tedder for medium-sized farms. Can be operated comfortably from the<br />
driver's seat.<br />
Tedding with smaller tractors: drawbar and single c.v. joint PTO shaft are<br />
available for HIT 470 and HIT 540.<br />
Alpine tedding with adjustable headstock<br />
ALPINHIT 44 H/N special – Alpine tedder, working width 13.12ft / 4.0 m (DIN).<br />
The tedder is mounted on the tractor hitch with an<br />
adjustable headstock to optimise centre of gravity.<br />
Special lightweight construction for twin axle<br />
mowers, mountain tractors and light<br />
tractors. High tensile strength,<br />
aluminium-alloy transmission<br />
casing and arms of spring<br />
steel guarantee this<br />
machine's toughness.<br />
Freewheel for PTO<br />
shaft also<br />
available.<br />
ALPINHIT 44 N - special<br />
11
6-rotor tedder<br />
HIT 610 NZ<br />
HIT 690 NZ<br />
12
est quality forage, stem for stem …<br />
The tedder range for<br />
farmers who place value on<br />
high performance, top-ofthe-range<br />
equipment and<br />
comfortable operation.<br />
The trailed version<br />
HIT 800 AZ can achieve<br />
really high coverage even<br />
with smaller tractors.<br />
610 N / NZ – working width 18.86 ft / 5.75 m (DIN)<br />
The special feature of the HIT 610 is its short headstock. The centre of gravity<br />
is located closer to the tractor hitch, reducing the power requirement of the<br />
tractor.<br />
The small diameter rotors (4.27 ft / 1.3 m) guarantee excellent ground<br />
hugging, best possible crop pickup and a uniform pattern of spread.<br />
690 N – working width 21.16 ft/ 6.45 m (DIN)<br />
The keenly-priced 6-rotor tedder with manual fenceline tedding system and<br />
16 x 6.5–8 tyres.<br />
690 NZ – working width 21.16 ft/ 6.45 m (DIN)<br />
800 AZ / NZ – working width 24.44 ft / 7.45 m (DIN)<br />
The A models are equipped with an additional chassis which is also trailed<br />
during operation.<br />
HIT 610 NZ / 690 NZ and 800 NZ tedders come with a fenceline tedding system<br />
as standard.<br />
Hydrolift is standard equipment on HIT 800 AZ. The outer pair of rotors are<br />
raised to the limit stops during turning, and the transport chassis lifts the<br />
whole tedder clear of the ground.<br />
A single-acting connection is all that is needed!<br />
HIT 690 N Transport<br />
HIT 800 AZ Transport<br />
13
8-rotor tedder<br />
HIT 910 NZ<br />
HIT 910 NZ<br />
14
where sheer performance is in demand ...<br />
The ultimate machine for<br />
demanding applications.<br />
You will look forward to<br />
working with this level of<br />
comfort.<br />
810 N / NZ – working width 25.26 ft / 7.70 m<br />
910 N / NZ – working width 28.21 ft / 8.60 m<br />
No power should be lost in the driveline. The heavy duty HIT-Tech double c.v.<br />
joints are similar to those on a tractor's front half-shafts. Each rotor can move<br />
freely under full power in every position. Ultimate ground hugging is guaranteed,<br />
even on slopes and rough ground.<br />
Details featuring Innovative Farming ...<br />
Power clutch on the outer rotors can be hinged<br />
through 180°. Extra thick fingers withstand the<br />
highest stress.<br />
No sinking in on damp ground<br />
The two inner rotors are fitted with especially high load bearing flotation tyres:<br />
220/50-6 (HIT 810) or 18.5x8.5-8 (HIT 910).<br />
HIT 810 N<br />
15
HIT 910 AZ<br />
8-rotor tedder
where sheer performance is in demand ...<br />
Wide during operation,<br />
narrow and low during<br />
transport.<br />
910 A / AZ – working width 28.21 ft / 8.60 m<br />
The HIT 910 AZ is equipped with a hydraulic pivoting transport chassis as<br />
standard. The chassis folds up hydraulically over the rotors during operation,<br />
improving the centre of gravity.<br />
The fenceline tedding system is also adjusted hydraulically.<br />
Lighting and warning signs are fitted as standard.<br />
HIT 910 A – with manually<br />
adjusted fenceline<br />
tedding system.<br />
Wide during operation, narrow<br />
and low during transport.<br />
Parking height 10.7 ft / 3.26 m<br />
NZ or 11.02 ft / 3.36 m AZ.<br />
The transport interlocks<br />
engage automatically when<br />
the rotor units are raised.<br />
On HIT 910 AZ:<br />
Comfortable operation<br />
Select Control<br />
as an option.<br />
17
Tedders with 4 and 6 rotors<br />
Farmers' needs are growing – and so is our product range. In addition to meeting the needs of small to medium sized farms<br />
we also aim to satisfy the requirements of contractors and large farms.<br />
HIT Width Working width Rotors Arms/ Transport Parking height<br />
H = hydraulic headstock rigid<br />
N = pivoting headstock<br />
A = trailed machine<br />
Z = central fenceline tedding system<br />
special = adjustable headstock<br />
PTO speed – 540 rpm<br />
DIN rotor width<br />
44 H special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m<br />
44 N special 14.6 ft / 4.45 m 13.12 ft / 4.00 m 4 5 9.84 ft / 2.45 m 6.96 ft / 2.12 m<br />
470 N 15.42 ft / 4.70 m 14.44 ft / 4.40 m 4 6 8.20 ft / 2.50 m 7.38 ft / 2.25 m<br />
540 N 17.72 ft / 5.40 m 17.06 ft / 5.20 m 4 7 9.35 ft / 2.85 m 8.53 ft / 2.60 m<br />
610 N 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m<br />
610 NZ 19.68 ft / 6.00 m 18.86 ft / 5.75 m 6 5 9.35 ft / 2.85 m 9.74 ft / 2.97 m<br />
690 N 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m<br />
690 NZ 22.47 ft / 6.85 m 21.16 ft / 6.45 m 6 6 9.84 ft / 3.00 m 10.99 ft / 3.35 m<br />
800 AZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m<br />
800 NZ 25.75 ft / 7.85 m 24.44 ft / 7.45 m 6 6 9.84 ft / 3.00 m 12.24 ft / 3.73 m<br />
All datas not binding<br />
HIT tedders to match any mower<br />
Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m<br />
ALPINHIT 44<br />
HIT 470<br />
HIT 540<br />
HIT 610<br />
HIT 690<br />
HIT 800<br />
18
44 N special, 44 H special<br />
min. kW/hp<br />
Weight<br />
11/15 540 lbs / 245 kg<br />
11/15 595 lbs / 270 kg<br />
15/20 846 lbs / 384 kg<br />
26/35 926 lbs / 420 kg<br />
30/40 1477 lbs / 670 kg<br />
30/40 1532 lbs / 695 kg<br />
33/45 1543 lbs / 700 kg<br />
33/45 1599 lbs / 725 kg<br />
30/40 1819 lbs / 825 kg<br />
37/50 1719 lbs / 780 kg<br />
470 N<br />
540 N<br />
610 N / NZ<br />
690 N / NZ<br />
8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m<br />
19
Tedders with 8 rotors<br />
Expectations regarding sheer processing capacity continue to<br />
increase. One of our aims is to meet the new requirements of<br />
contractors and large farms.<br />
HIT Width Working width Rotors Arms/rotor Transport Parking height<br />
DIN<br />
width<br />
810 N 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m<br />
810 NZ 25.62 ft / 7.81 m 25.26 ft / 7.70 m 8 5 9.84 ft / 3.00 m 12.14 ft / 3.70 m<br />
910 A 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m<br />
910 AZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m<br />
910 N 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m<br />
910 NZ 29.07 ft / 8.86 m 28.21 ft / 8.60 m 8 6 9.84 ft / 3.00 m 10.07 ft / 3.26 m<br />
All datas not binding<br />
N = pivoting headstock<br />
A = trailed machine<br />
Z = central fenceline tedding system<br />
PTO speed – 540 rpm<br />
HIT tedders to match any mower<br />
Mower working width 5.41 ft / 1.65 m 6.07 ft / 1.85 m 7.22/7.38 ft / 2.20/2.25 m<br />
HIT 810<br />
HIT 910<br />
Mower combinations 17.39 ft / 5.30 m 18.70 ft / 5.70 m 20.34 ft / 6.20 m<br />
HIT 810<br />
HIT 910<br />
Front mower 9.84 ft / 3 m<br />
Rear mower 8.60 ft / 2.60 m<br />
Front mower 9.84 ft / 3 m<br />
Rear mower 9.84 ft / 3 m<br />
Front mower 9.84 ft / 3 m<br />
Rear mower 11.48 ft / 3.50 m<br />
20
HIT 910 A / NZ / AZ<br />
min. kW/hp Weight Hydraulic connections on tractor<br />
40/55 22073 lbs / 940 kg 1 single-acting<br />
40/55 2117 lbs / 960 kg 1 single-acting<br />
33/45 3076 lbs / 1395 kg 1 double-acting / 1 single-acting<br />
33/45 3120 lbs / 1415 kg 1 double-acting<br />
45/60 2491 lbs / 1130 kg 1 double-acting<br />
45/60 2536 lbs / 1150 kg 1 double-acting<br />
8.5/8.6 ft / 2.60/2.62 m 8.86 ft / 2.70 m 9.97/10 ft / 3.04/3.05 m 11.35/11.48 ft / 3.46/3.50 m<br />
24.41 ft / 7.44 m 27.23 ft / 8.30 m<br />
Front mower 9.84 ft / 3 m<br />
2 x rear mower 8.60 ft / 2.60 m<br />
Front mower 9.84 ft / 3 m<br />
2 x rear mower 9.84 ft / 3 m<br />
21
Options<br />
HIT Tyres Tyres Additional Fenceline tedding system<br />
Chassis<br />
Jockey wheel<br />
44 H special 13 x 5.0-6<br />
44 N special 13 x 5.0-6 Optional Manual<br />
470 N 15 x 6.00-6 Optional Manual<br />
540 N 16 x 6.5-8 Optional Manual<br />
610 N 15 x 6.00-6 Optional Manual<br />
610 NZ 15 x 6.00-6 Optional Remote<br />
690 N 16 x 6.5-8 Optional Manual<br />
690 NZ 16 x 6.5-8 Optional Remote<br />
800 AZ 16 x 6.5-8 18.5 x 8.5-8 Remote<br />
800 NZ 16 x 6.5-8 Optional Remote<br />
810 N 15 x 6.00-6* Optional Manual<br />
810 NZ 15 x 6.00-6* Optional Remote<br />
910 A 16 x 6.5-8 260/70-15,3 Optional Manual<br />
910 AZ 16 x 6.5-8 260/70-15,3 Optional Remote<br />
910 N 16 x 6.5-8** Optional Manual<br />
910 NZ 16 x 6.5-8** Optional Remote<br />
* Middle rotors 220/50-6<br />
**Middle rotors 18.5 x 8.5-8<br />
Manual wheel adjustment<br />
13 x 5,0-6<br />
18,5 x 8,5-8<br />
15 x 6,00-6, 16 x 6,5-8<br />
15 x 6,00-6<br />
16 x 6,5-8<br />
Central fenceline adjustment<br />
260/70-15,3<br />
18,5 x 8,5-8<br />
22
Hydraulic Hydrokomfort Shock absorber Swath Lighting<br />
fenceline system struts transmission<br />
Optional<br />
Optional<br />
Optional<br />
Standard Optional Optional Optional / Optional<br />
Standard Optional Optional Optional / Optional<br />
Standard Optional* Optional Standard / Optional<br />
Optional Standard Optional* Optional Standard / Optional<br />
Standard Standard Optional Standard / Optional<br />
Optional Standard Standard Optional Standard / Optional<br />
Standard Standard – Optional Standard<br />
Optional Standard Standard Optional Standard / Optional<br />
Standard Standard Optional Standard / Optional<br />
Optional Standard Standard Optional Standard / Optional<br />
Standard – Optional Standard<br />
Standard Standard – Optional Standard<br />
Standard Standard Optional Standard / Optional<br />
Optional Standard Standard Optional Standard / Optional<br />
* Shock absorber bar standard<br />
Single-acting hydraulic<br />
connection (610, 690, 800,<br />
910 NZ)<br />
Hydrokomfort 44, 470,<br />
540 single-acting<br />
Shock absorber Swath gear unit Warning signs to national<br />
road safety requirements.<br />
Double-acting hydraulic<br />
connection 910 AZ<br />
Hydrolift 610, 690, 800<br />
single-acting<br />
Absorber bar<br />
standard on 610 N<br />
Lighting<br />
Hydrolift 910 doubleacting<br />
All data for information only, features may vary from country to country.<br />
23
Quality for the future<br />
Machines with the cloverleaf mark are internationally successful with reliable quality<br />
and service.<br />
Cathodic electrodip priming and powder coating – automobile paint quality<br />
Laser cutting machines for high-precision panel forming<br />
New durability centre for expendable parts<br />
The latest 3D construction<br />
Future-safe component part testing – at the new Grieskirchen Technology and Innovation<br />
Centre, the most demanding working conditions are simulated and maximum limits are<br />
determined<br />
Pöttinger original expendable parts offer added value at a glance: High durability, precise<br />
fitting accuracy and constant availability.<br />
Product delivery – Every Pöttinger customer has a right to the orderly delivery of the product by<br />
their Pöttinger sales agent, in order to ensure the guarantee.<br />
<strong>Alois</strong> Pöttinger<br />
<strong>Maschinenfabrik</strong> <strong>GmbH</strong><br />
Industriegelände 1<br />
A-4710 Grieskirchen<br />
Phone: +43 (0) 7248/600-0<br />
Fax: +43 (0) 7248/600-2445<br />
Pottinger UK<br />
Redlake Trading Estate<br />
Ivybridge<br />
Devon PL21 0EZ – England<br />
Phone: 01752 891375<br />
Fax: 01752 891379<br />
www.pottingeruk.co.uk<br />
Poettinger Canada Inc.<br />
650, Route 112<br />
St-Cesaire, J0L 1 T0, PQ<br />
Phone: (450) 469-5594<br />
Fax: (450) 469-4466<br />
E-Mail:<br />
sales.canada@poettinger.ca<br />
Web: www.poettinger.ca<br />
Poettinger US Inc.<br />
107 Eastwood Road<br />
Michigan City, IN 46360<br />
Toll-free: 1-855-879-8597<br />
Tel: (219) 879-8597<br />
Fax: (219) 879-5102<br />
E-mail: sales.us@poettinger.us<br />
Poettinger Australia P/L<br />
15 Fordson Road<br />
Campbellfield, VIC 3061<br />
Phone: +61 3 9359 2969<br />
Fax: +61 3 9359 6962<br />
e-mail:<br />
sales.au@poettinger.com.au<br />
www.poettinger.com.au<br />
Importer for Ireland:<br />
T. Traynor & Sons Ltd.<br />
Cashel Road, Clonmel<br />
Co. Tipperary<br />
Ireland<br />
Phone: 052/25 766<br />
Fax: 052/25 802<br />
e-mail: info@traynor.ie<br />
www.traynor.ie<br />
www.poettinger.at – e-mail: landtechnik@poettinger.at<br />
Importer for New Zealand:<br />
Origin Agroup<br />
PO Box 673, 57 Hautapu Road<br />
Cambridge<br />
Phone: 064 7 823 7582<br />
Fax: 064 7 823 7583<br />
e-mail:<br />
info@originagroup.co.nz<br />
www.originagroup.co.nz<br />
Be more successful with<br />
Hit/en 0911