Datenblatt

Datenblatt
Preise online unter
www.PLUG-IN.de
Gerne erstellen wir für Sie ein unverbindliches Angebot!
Kontaktieren Sie uns per Telefon, Fax oder E-Mail und nennen Sie uns Ihre Wünsche:
Ringstr. 48 • D-82223 Eichenau
Tel.: +49 (0) 8141/36 97-0
Fax: +49 (0) 8141/36 97-30
E-Mail: info@PLUG-IN.de
www.PLUG-IN.de

DNA-5B-CONN
24-channel PowerDNA Signal-Conditionig Mating Panel
........................................................................................................................................................
• Connects 5B-class racks and signal-conditioning panels with voltage-input layers
• Works with DNA-AI-201 (general-purpose analog inputs) and
DNA-AI-225 (simultaneous sampling analog inputs)
• Includes resistor networks that act as a 10:1 voltage divider
to bring 0-5V, 0-10V signals into range for AI-225
• Voltage divider is jumper configurable
2/14/2006/11:00
General Description:
The DNA-5B-CONN provides a way to attach 5B-class signal-conditioning modules to a PowerDNA Cube’s voltage-input layers. The DNA-CBL-37
cable connects a DNA-AI-201 layer to JC2 on the panel; the DNA-CBL-62 cable connects a DNA-AI-225 layer to JC1 on the panel. The resistor network
brings 0-5V or 0-10V signals into the DNA-AI-225’s input range (1.25V). You attach one 5B panel for the first 16 inputs and a second 5B panel for an
additional 8 inputs. The terminal panel gives you access to clock signals and power for the 5B panels.
Block Diagram:
Technical Specifications:
JC1
62-pin Connector
10:1 Voltage Divider
+18V
AGND
-18V
AGND
+VBO*
Terminal Blocks (15)
JC2
37-pin Connector
*
+VBO — voltage booster output, for RTD
TC Neg, TC Pos — inputs for ambient temp sensor
GA — general alarm: TTL output for external alarm circuitry
FF1, FF0 — feed-forward TTL inputs for control apps
AGND
Connection Diagram:
PD-5B-01
EXT CLK
CLK OUT
PD-CBL-5B
EXT GND
TC NEG*
TC POS*
GA*
FF1*
FF0*
JT1
0..15 16..23
5B Connector J2
5B Connector J3
Connectors:
2 x IDC-26 (to 5B panels)
1 x DB-37 (to AI-201 layer)
1 x DB-62 (to AI-225 layer)
1 x Terminal Block for power, clocks
Analog-Input Capacity 24 channels (J2: 0-15; J3: 16-23)
Operating Temp. Range -40 to 85°C
Dimensions
4.2x4.2x1”
(height includes 0.25” standoffs)
Pinout Diagrams:
JC1 — DB-62 (female)
62-pin connector:
62 FF0 42 AGND 21 VBO
61 AIN1 41 AGND 20 AIN0
60 AGND 40 AIN2 19 AGND
59 AIN4 39 AGND 18 AIN3
58 AGND 38 AIN5 17 AGND
57 AIN17 37 AGND 16 AIN6
56 AGND 36 AIN8 15 AGND
55 AIN10 35 AGND 14 AIN9
54 AGND 34 AIN11 13 AGND
53 AIN13 33 AGND 12 AIN12
52 AGND 32 AIN14 11 AGND
51 AIN16 31 AGND 10 AIN15
50 AGND 30 AIN17 9 AGND
49 AIN19 29 AGND 8 AIN18
48 AGND 28 AIN20 7 AGND
47 AIN22 27 AGND 6 AIN21
46 AGND 26 AIN23 5 AGND
45 AGND 25 TC NEG 4 TC POS
44 GA 24 AGND 3 VBO
43 N/C 23 –N/C 2 FF1
22 –N/C 1 N/C
J2 — IDC-26 (male)
26-pin 5B connector:
AIN0 1 2 AIN8
AGND 3 4 AIN9
AIN1 5 6 AGND
AIN2 7 8 AIN10
AGND 9 10 AIN11
AIN3 11 12 AGND
AIN4 13 14 AIN12
AGND 15 16 AIN13
AIN5 17 18 AGND
AIN6 19 20 AIN14
AGND 21 22 AIN15
AIN7 23 24 AGND
N/C 25 26 N/C
DNA-CBL-37
DNA-AI-201
J3 — IDC-26 (male)
26-pin 5B connector:
DNA-CBL-62
PD-5B-01
PD-CBL-5B
Note: PD-5B back panels require +5V. UEI recommends PD-PSU-5/15 power supply.
DNA-5B-CONN
OR
DNA-AI-225
JC2 — DB-37 (male)
37-pin connector:
-18V 20 1 AGND
+18V 21 2 AGND
CLKOUT 22 3 EXTCLK
AIN23 23 4 EXTGND
AIN22 24 5 AIN11
AIN21 25 6 AIN10
TC NEG 26 7 AIN9
AIN20 27 8 TC POS
AIN19 28 9 AIN8
AIN18 29 10 AIN7
AGND 30 11 AIN6
AIN17 31 12 AGND
AIN16 32 13 AIN5
AIN15 33 14 AIN4
AGND 34 15 AIN3
AIN14 35 16 AGND
AIN13 36 17 AIN2
AIN12 37 18 AIN1
19 AIN0
AIN16 1 2 N/C
AGND 3 4 N/C
AIN17 5 6 AGND
AIN18 7 8 N/C
AGND 9 10 N/C
AIN19 11 12 AGND
AIN20 13 14 N/C
AGND 15 16 N/C
AIN21 17 18 AGND
AIN22 19 20 N/C
AGND 21 22 N/C
AIN23 23 24 AGND
N/C 25 26 N/C
Connection Schemes:
Connector Cable
Target
On The Board Required
Panel
Description
J2, J3 PDL-CBL-5B PD-5B-01 Connects DNA-5B-CONN to 5B 16-channel signal-conditioning panel.