Embedded Application Programming Interface - picmg
Embedded Application Programming Interface - picmg
Embedded Application Programming Interface - picmg
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
5 Backlight Functions<br />
This function sub set facilitates backlight control for Integrated flat panel displays, typically LVDS.<br />
5.1 Common Parameters for Backlight Functions<br />
5.1.1 Backlight Ids<br />
Selects the flat panel display.<br />
Id<br />
Description<br />
EAPI_ID_BACKLIGHT_1 Backlight Local Flat Panel 1<br />
EAPI_ID_BACKLIGHT_2 Backlight Local Flat Panel 2<br />
EAPI_ID_BACKLIGHT_3 Backlight Local Flat Panel 3<br />
The IDs for the backlights are filled according to this fill order:<br />
• Internal PWM<br />
• EAPI_COM0_ID_I2C_LVDS_1 I2C Device<br />
• SDVOB PWM (via SDVO to LVDS converter)<br />
• SDVOB I2C Device (via SDVO to LVDS converter)<br />
• SDVOC PWM (via SDVO to LVDS converter)<br />
• SDVOC I2C Device (via SDVO to LVDS converter)<br />
• DDI1 I2C Device eDP<br />
• DDI2 I2C Device eDP<br />
• DDI3 I2C Device eDP<br />
The EAPI expects that the backlight control hardware for the SDVO ports is implemented according to<br />
the Intel SDVO specification.<br />
5.1.2 Backlight Enable Values<br />
Name<br />
EAPI_BACKLIGHT_SET_ON<br />
EAPI_BACKLIGHT_SET_OFF<br />
Description<br />
Requests/Signifies that the Backlight be Enabled<br />
Requests/Signifies that the Backlight be Disabled<br />
5.1.3 Backlight Brightness Value Range<br />
Name<br />
EAPI_BACKLIGHT_SET_DIMMEST<br />
EAPI_BACKLIGHT_SET_BRIGHTEST<br />
Description<br />
Represents the lower range bound for the backlight<br />
brightness<br />
Represents the upper range bound for the backlight<br />
brightness<br />
5.2 EApiVgaGetBacklightEnable<br />
PICMG® EAPI R1.0, August 8, 2010 page 24 of 83