MS Typ 1 poly - Photovoltaik

downloaded from www.photovoltaik-web.de
MegaSlate ® Type 1 poly
SolarWood Technologies S. A. introduces an innovation in the field
of roof integrated photovoltaics: The SolarWood MegaSlate ® . This
concept combines both, a long-lasting weather proofed roofing and
a photovoltaic generator to produce electrical power. The twelve
different dimensioned solar panels of the MegaSlate ® family allow
an individual adaption of the photovoltaic system to the given roof
area. The result is an integrated and consistent roof covering with
an optimal aesthetic overall picture.
Contact:
SolarWood Technologies S.A
Ecostart 2 – Z.I. Foetz
Rue du Commerce
L-3895 Foetz
Luxembourg
Tel.: +352 80 70 96
Fax: +352 26 80 32 34
E-mail: info@solarwood.lu
www.solarwood.lu
Please visit our website for
more information.
The innovative MegaSlate ® mounting system enables an uncomplicated
and fast installation. Due to the vertical overlapping of the
panels a very good rear ventilation and optimal rain proofing is
given. The frameless design avoids long term dirt accumulation at
the edge of the e panel and conveys down sliding of snow loads.
All panels of the SolarWood MegaSlate ® family feature bypass
diodes. These diodes minimise power loss in case of shading and
protect the panel against hot spot effect.

downloaded from www.photovoltaik-web.de
MegaSlate ® Type 1 poly
Electrical performance at standard test conditions SW MS T1 poly 64
SW MS T1 poly 71
Maximum electrical power (+/- 5%)
Pmax
64 Wp
71 Wp
Short Circuit Current
Isc
7,70 A
7,80 A
Open Circuit Voltage
Voc
12,00 V
12,50 V
Rated Current
Impp
7,00 A
7,10 A
Rated Voltage
Vmpp
9,20 V
10,20 V
Electrical performance at NOCT, AM 1,5, 800 W/m² SW MS T1 poly 64
SW MS T1 poly 71
Maximum electrical power
Pmax
47 Wp
53 Wp
Short Circuit Current
Isc
6,22 A
6,30 A
Open Circuit Voltage
Voc
11,21 V
11,71 V
Rated Current
Impp
5,66 A
5,74 A
Rated Voltage
Vmpp
8,42 V
9,24 V
Thermal characteristics
General characteristics
NOCT
43
Module weight
10,8 kg
TC Isc
0,06 %/K
Connection cables
MC 3 / MC 4
TC Voc
-0,35 %/K
Overlapping width
120 mm
TC Pn
Build-in components
Cell type
Cells per Module
Cell dimensions
Junction box
Glass
Glass thickness
Characteristic quantities for system integration
-0,46 %/K
Polycristalline
20
156 x 156 mm 2
IP 65 with 2 bipass diodes
Tempered glass
6 mm
Maximum permissible system voltage
1000 V
Protection classification
Safety Class II
Efficency reduction 1000 – 200 W/m² (+/-3%)
96% at STC
Limiting reverse current
Do not apply external Voltages
larger than VOC to the module
Current (A)
U/I Curve
9,00
1000 W/m² at 25°C
6,00
800 W/m² at 25°C
3,00
400 W/m² at 25°C
800 W/m² at NOCT
0,00
0,00 3,00 6,00 9,00 12,00
Voltage (V)
Certifications
Warranty
IEC 61215
10 years on 90 % of Pmax
IEC 61730 (in progress)
25 years on 80 % of Pmax
CE
5 years product guarantee
Front side
Side view
Backside
Design
2
3
5
4
1
1) Tempered glass
2) EVA (ethylene-vinyl acetate)
3) Polycrystalline Solar Cells
4) EVA (ethylene-vinyl acetate)
5) Tedlar (polyvinyl fluoride)
© September 2008 SolarWood Technologies S. A. All rights reserved. Specifications included in this datasheet are subject to change without prior notice.
This Datasheet was created in accordance to EN 50380.
www.solarwood.lu