Regional Haul Model Operator's Manual - Peterbilt Motors Company

DASH- AND DOOR-MOUNTED FEATURES
CONTROLS AND DISPLAY
START
START
CAUTION: Do not leave the three position switch
in the STOP position unless you need to cancel
or stop regeneration. Leaving the switch in the
STOP position for extended periods of time will
result in increased soot levels in the DPF which
can affect engine performance or disable the
engine.
Power Mirror Switch
Two Position
CENTER (three position switch only)
STOP
Three Position
Center is the normal position of the switch.
The center position will allow an automatic regeneration
to occur.
STOP (three position switch only)
When STOP is pressed the system will not regenerate
under any conditions.
If your vehicle is equipped with power mirrors, the mirror
controls will be located on the driver side door pad. Aerodynamic-style
mirrors are controlled for 4-way adjustable
movement, while Moto mirrors are controlled for 2-way
adjustable movement.
WARNING! Convex mirrors can distort images
and make objects appear smaller and farther
away than they really are. You could have an
accident resulting in death or personal injury if
you are too close to another vehicle or other
object. Keep plenty of space between your
vehicle and others when you turn or change
lanes. Remember that other objects are closer
than they may appear.
– 56 – Y53-6033 Regional Haul (R05/10)