20.05.2014 Views

Regional Haul Model Operator's Manual - Peterbilt Motors Company

Regional Haul Model Operator's Manual - Peterbilt Motors Company

Regional Haul Model Operator's Manual - Peterbilt Motors Company

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

CONTROLS AND DISPLAY<br />

CAUTION: Keep the engine running if the engine<br />

is overheating and the low coolant alarm is not<br />

on. Allowing the engine to run with coolant in<br />

the system will help protect the engine from<br />

overheating whick will reduce the damage to the<br />

engine.<br />

• With the transmission in neutral, check to be certain<br />

the oil pressure gauge reads normal. Increase the<br />

engine speed to about 1100 - 1200 RPM, maximum.<br />

Return the idle speed to normal after 2 or 3 minutes. If<br />

the warning light does not go off or the temperature<br />

gauge does not begin to drop, then turn the engine<br />

off.<br />

• If the overheating came from severe operating conditions,<br />

the temperature should have cooled by this<br />

time. If it has not, stop the engine and let it cool before<br />

checking to see if the coolant is low.<br />

Fuel Gauge<br />

STANDARD GAUGES<br />

WARNING! Do not remove a fuel tank cap near<br />

an open flame. Hot fuel vapors are combustible<br />

and can cause an explosion or fire resulting<br />

in death, injury or property damage.<br />

CAUTION: Use Ultra Low Sulfur Diesel fuel only.<br />

Failure to do so may damage components of the<br />

engine and Diesel Particulate Filter (DPF).<br />

<strong>Regional</strong> <strong>Haul</strong> (R05/10) Y53-6033 – 41 –

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!