Regional Haul Model Operator's Manual - Peterbilt Motors Company
Regional Haul Model Operator's Manual - Peterbilt Motors Company Regional Haul Model Operator's Manual - Peterbilt Motors Company
INSTRUMENTS AND CONTROLS CONTROLS AND DISPLAYS 3 criticality. The most critical warning will be displayed on the top row and to the left. If more than six warnings are active, the menu control switch (MCS) can be used to scroll through the additional warnings. 1 2 2. Status Indicator: Additional lights and indicator symbols are displayed in the Status Indicator. They are limited to: a. Park Brake b. Transmission Gear (Automatic transmissions only) c. Warnings: 1. Driver Information Display 2. Status Indicator 3. Light Bar Number of active warnings. Warning lights and indicator symbols will be shown in both areas 1 and 2. Area 3 is dedicated to the turn and high beam indicator symbols. 1. Driver Information Display: The display can show up to six warning lights. Warnings do not have fixed positions and are displayed in order of – 18 – Y53-6033 Regional Haul (R05/10)
CONTROLS AND DISPLAYS INSTRUMENTS AND CONTROLS A red warning is active. First An amber warning is active. Second d. Cruise Control - active e. Clock alarm bell Refer to “Warning Light / Indicator Symbols” on page 20 for information on each symbol. Instrument System Self Test: When the ignition switch is turned on the instrumentation system will undergo a Self Test. This test will verify the operation of the gauges and warnings. During the Instrumentation System Self Test, three screens will sequentially display warning icons (approximately 3 seconds each screen) on the Information Display. These are: Third Refer to “Warning Light / Indicator Symbols” on page 20 for information on each symbol. Completing this sequence will indicate a successful Self Test. Have your instrumentation system checked by a qualitfied service technician if does not successfully complete. Audible Alarm: The audible alarm will sound during the Instrumentation System Self Test. The audible alarm will also sound in conjunction with some warning lights. These events Regional Haul (R05/10) Y53-6033 – 19 –
- Page 1 and 2: Y53-6033-RegionalHual-FrontCover.ai
- Page 3 and 4: Other Publications Order either of
- Page 5 and 6: INTRODUCTION HOW TO USE THIS MANUAL
- Page 7 and 8: INTRODUCTION Vehicle Safety Make su
- Page 9 and 10: INTRODUCTION Shop Manuals If you do
- Page 11 and 12: CAB AND FRAME ACCESS INTRODUCTION C
- Page 13 and 14: CAB AND FRAME ACCESS CAB AND FRAME
- Page 15 and 16: ENGINE ACCESS Put one hand on the h
- Page 17 and 18: ENGINE ACCESS HOOD HOLD DOWNS AND T
- Page 19 and 20: CONTROLS AND DISPLAYS INSTRUMENTS A
- Page 21: CONTROLS AND DISPLAYS INSTRUMENTS A
- Page 25 and 26: CONTROLS AND DISPLAYS Warning Light
- Page 27 and 28: CONTROLS AND DISPLAYS Warning Light
- Page 29 and 30: CONTROLS AND DISPLAYS 9. Cruise Con
- Page 31 and 32: CONTROLS AND DISPLAYS injury. 20. E
- Page 33 and 34: CONTROLS AND DISPLAYS 32. Seat Belt
- Page 35 and 36: CONTROLS AND DISPLAYS • MCS butto
- Page 37 and 38: CONTROLS AND DISPLAYS - Trip Idle P
- Page 39 and 40: CONTROLS AND DISPLAYS INSTRUMENTS A
- Page 41 and 42: CONTROLS AND DISPLAY STANDARD GAUGE
- Page 43 and 44: CONTROLS AND DISPLAY Engine Oil Pre
- Page 45 and 46: CONTROLS AND DISPLAY CAUTION: Keep
- Page 47 and 48: CONTROLS AND DISPLAY OPTIONAL GAUGE
- Page 49 and 50: CONTROLS AND DISPLAY operate the si
- Page 51 and 52: CONTROLS AND DISPLAY OPTIONAL GAUGE
- Page 53 and 54: CONTROLS AND DISPLAY See “Brake S
- Page 55 and 56: CONTROLS AND DISPLAY DASH- AND DOOR
- Page 57 and 58: CONTROLS AND DISPLAY ID and Clearan
- Page 59 and 60: CONTROLS AND DISPLAY WARNING! Do no
- Page 61 and 62: CONTROLS AND DISPLAY DASH- AND DOOR
- Page 63 and 64: CONTROLS AND DISPLAY closed or open
- Page 65 and 66: CONTROLS AND DISPLAY DASH- AND DOOR
- Page 67 and 68: CONTROLS AND DISPLAY WARNING! Do no
- Page 69 and 70: CONTROLS AND DISPLAY •If you are
- Page 71 and 72: CONTROLS AND DISPLAY CIGARETTE LIGH
CONTROLS AND DISPLAYS<br />
INSTRUMENTS AND CONTROLS<br />
A red warning is active.<br />
First<br />
An amber warning is active.<br />
Second<br />
d. Cruise Control - active<br />
e. Clock alarm bell<br />
Refer to “Warning Light / Indicator Symbols” on page 20<br />
for information on each symbol.<br />
Instrument System Self Test:<br />
When the ignition switch is turned on the instrumentation<br />
system will undergo a Self Test. This test will verify the<br />
operation of the gauges and warnings.<br />
During the Instrumentation System Self Test, three<br />
screens will sequentially display warning icons (approximately<br />
3 seconds each screen) on the Information Display.<br />
These are:<br />
Third<br />
Refer to “Warning Light / Indicator Symbols” on page 20<br />
for information on each symbol.<br />
Completing this sequence will indicate a successful Self<br />
Test. Have your instrumentation system checked by a<br />
qualitfied service technician if does not successfully complete.<br />
Audible Alarm:<br />
The audible alarm will sound during the Instrumentation<br />
System Self Test. The audible alarm will also sound in<br />
conjunction with some warning lights. These events<br />
<strong>Regional</strong> <strong>Haul</strong> (R05/10) Y53-6033 – 19 –