Medium Duty Operator's Manual - Peterbilt Motors Company

DASH- AND DOOR-MOUNTED FEATURES
CONTROLS AND DISPLAY
To Adjust Moto Mirrors
1. Move the mirror selector switch to the right or left from
the neutral center position to select the desired mirror
for adjustment.
NOTE: If the mirror is fixed (non-motorized) on
the left side, then the mirror selector switch will
ONLY allow selection of the neutral and right mirror
switch positions.
2. Depress the mirror directional control pad towards the
arrows pointing left or right to adjust the mirror in/out.
NOTE: After mirror adjustments have been completed,
return the mirror selector switch back to
the center (neutral) position, to prevent unintentional
adjustments to the mirrors.
Mirror Heat Switch
Mirror Heat
Switch Button
Mirror Heat
Indicator Light
Your vehicle may be equipped with optional heated mirrors.
Mirror heat is controlled by the mirror heat switch button,
which is part of the mirror switch module located on
the driver side door pad. Motorized mirrors with mirror
heat have an automatic 15-minute “time out” feature,
where the mirror heat-only module is automatically deactivated.
To defrost the mirrors in cold weather, depress the mirror
heat switch button and release. The mirror heat symbol in
the button will illuminate to indicate the mirror heat function
has been activated. Pressing and releasing the button
again turns the mirror heat and the indicator light Off.
– 56 – Y53-6008A Medium Duty (R05/09)