20.05.2014 Views

Medium Duty Operator's Manual - Peterbilt Motors Company

Medium Duty Operator's Manual - Peterbilt Motors Company

Medium Duty Operator's Manual - Peterbilt Motors Company

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

OPTIONAL GAUGES<br />

High Beam Headlamps<br />

NOTE: The headlamps must be “ON” for the high<br />

beam switch to operate.<br />

• To switch your headlamps to lower or higher beam,<br />

gently pull the turn signal lever towards the steering<br />

wheel, until you hear the switch click and the beam<br />

changes. The blue indicator light in the instrument<br />

panel will be ON when the high beam is being used.<br />

• To return to previous beam: pull the lever towards the<br />

steering wheel again.<br />

Headlamp Flash<br />

To activate headlamp flash, gently push the turn signal<br />

lever away from the steering wheel until you hear and feel<br />

the switch click. Release lever to deactivate.<br />

• If your headlamps are off, low beams will flash on.<br />

• If your headlamps are on, they will dim. Maximum<br />

duration of dimming is 3 seconds. When the function<br />

ends, your headlamps will return to low beams.<br />

ID And Clearance Lights Flash<br />

CONTROLS AND DISPLAY<br />

To flash, press the button on the end of the turn signal<br />

lever and hold. To cancel the flash, release the button.<br />

Press In For Washer Pump<br />

Rotate To Change Wiper Mode<br />

Press Button For ID and Clearance Lights Flash<br />

If your ID and clearance lights are on, they will flash off.<br />

Windshield Wipers/Washer<br />

Your vehicle is equipped with a two-speed, intermittent<br />

windshield wiper system. A seven-position rotary wiper<br />

switch (located on the turn signal lever) operates the windshield<br />

wipers and washer (see next illustration). Rotate<br />

the end of the turn signal lever to change the wiper mode.<br />

NOTE: The ignition key must be turned to ON or<br />

ACC for the wiper/washer switches to operate.<br />

– 44 – Y53-6008A <strong>Medium</strong> <strong>Duty</strong> (R05/09)

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!