Medium Duty Operator's Manual - Peterbilt Motors Company
Medium Duty Operator's Manual - Peterbilt Motors Company Medium Duty Operator's Manual - Peterbilt Motors Company
INSTRUMENTS AND CONTROLS – PTO Hours – PTO Trip Hours – PTO Trip Percentage (%) To reset the Trip Values, press the Trip Odometer Reset Button on the main gauge instrument cluster. E. Truck Information (Accessible only while parked) NOTE: When accessing the truck information menu, push the MCS on this menu (bullet). To exit, push the MCS again. CONTROLS AND DISPLAYS 6. Transmission Model 7. Transmission SW Version 8. ABS (Antilock Braking System) Make 9. ABS Model 10. ABS SW Version 11. CECU (Cab Electronic Control Unit) Software Version 12. CECU Hardware Version F. Diagnostic Display (Accessible only while parked) NOTE: “Faults Found” will only be active if a red or yellow warning lamp is illuminated. 1. Chassis Number 2. Engine Make 3. Engine Model 4. Engine SW Version 5. Transmission Make The diagnostic display menu (bullet) will indicate a fault that is generated by the vehicle's Engine, ABS and/or Transmission systems. While on this menu item the display will either indicate "No Faults – 32 – Y53-6008A Medium Duty (R05/09)
CONTROLS AND DISPLAYS Found" or "Faults Found". If "Faults Found" is active, pushing the MCS will display new menus for more information. G. Transmission Display (Automated Transmissions only - Accessible while parked or driving) NOTE: Refer to the Automated Transmission Operator’s Manual for additional information. INSTRUMENTS AND CONTROLS • Display Format 12 Hour (AM/PM) or 24 Hour (military) • Home/Local Time • Alarm ON/OFF • Alarm Time • Units of measure • Language (English, Spanish or French) This menu will show gear number that coincides with the current transmission gear selected. The menu also displays the transmission icon to let the user know what screen they are in. (Does not indicate a fault code.) H. Settings Menu (Accessible only while parked) The Settings menu screen allows the driver to view and/or change the following menu items: To Set Clock Display Format: 1. When in the Settings Menu, scroll through the list of menu items to "Format". 2. Press the MCS to display either 12 hour (AM/ PM) or 24 hour (military) time. Medium Duty (R05/09) Y53-6008A – 33 –
- Page 2 and 3: Quick Table of Contents •Introduc
- Page 4 and 5: INTRODUCTION WARNING When you see t
- Page 6 and 7: INTRODUCTION A Special Word About R
- Page 8 and 9: INTRODUCTION Other Sources Another
- Page 10 and 11: CAB AND FRAME ACCESS 02611 • Use
- Page 12 and 13: HOOD HOLD DOWNS AND TILT Put one ha
- Page 14 and 15: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 16 and 17: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 18 and 19: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 20 and 21: INSTRUMENTS AND CONTROLS include bu
- Page 22 and 23: INSTRUMENTS AND CONTROLS Warning Li
- Page 24 and 25: INSTRUMENTS AND CONTROLS Illuminate
- Page 26 and 27: INSTRUMENTS AND CONTROLS 19. Engine
- Page 28 and 29: INSTRUMENTS AND CONTROLS 33. Tire I
- Page 30 and 31: INSTRUMENTS AND CONTROLS • MCS bu
- Page 34 and 35: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 36 and 37: STANDARD GAUGES CONTROLS AND DISPLA
- Page 38 and 39: STANDARD GAUGES Engine Oil Pressure
- Page 40 and 41: STANDARD GAUGES the warning light d
- Page 42 and 43: OPTIONAL GAUGES WARNING! The air pr
- Page 44 and 45: OPTIONAL GAUGES High Beam Headlamps
- Page 46 and 47: OPTIONAL GAUGES To Wash The Windshi
- Page 48 and 49: DASH- AND DOOR-MOUNTED FEATURES To
- Page 50 and 51: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 52 and 53: DASH- AND DOOR-MOUNTED FEATURES Fog
- Page 54 and 55: DASH- AND DOOR-MOUNTED FEATURES cru
- Page 56 and 57: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 58 and 59: DASH- AND DOOR-MOUNTED FEATURES Man
- Page 60 and 61: DASH- AND DOOR-MOUNTED FEATURES WAR
- Page 62 and 63: DASH- AND DOOR-MOUNTED FEATURES (2)
- Page 64 and 65: HEATER-AIR CONDITIONING CONTROLS He
- Page 66 and 67: HEATER-AIR CONDITIONING CONTROLS CO
- Page 68 and 69: CUPHOLDERS/ASHTRAY prevent damage s
- Page 70 and 71: ACCESSORIES Accessories Peterbilt N
- Page 72 and 73: SEATS Seats Introduction This secti
- Page 74 and 75: SEATS WARNING! Do not drive vehicle
- Page 76 and 77: SEATS • Be sure, also, that your
- Page 78 and 79: SEATS • If any seat belt is not w
- Page 80 and 81: SEATS During Pregnancy Pregnant wom
CONTROLS AND DISPLAYS<br />
Found" or "Faults Found". If "Faults Found" is active,<br />
pushing the MCS will display new menus for more<br />
information.<br />
G. Transmission Display (Automated Transmissions<br />
only - Accessible while parked or driving)<br />
NOTE: Refer to the Automated Transmission<br />
Operator’s <strong>Manual</strong> for additional information.<br />
INSTRUMENTS AND CONTROLS<br />
• Display Format 12 Hour (AM/PM) or 24 Hour<br />
(military)<br />
• Home/Local Time<br />
• Alarm ON/OFF<br />
• Alarm Time<br />
• Units of measure<br />
• Language (English, Spanish or French)<br />
This menu will show gear number that coincides with<br />
the current transmission gear selected. The menu<br />
also displays the transmission icon to let the user<br />
know what screen they are in. (Does not indicate a<br />
fault code.)<br />
H. Settings Menu (Accessible only while parked)<br />
The Settings menu screen allows the driver to view<br />
and/or change the following menu items:<br />
To Set Clock Display Format:<br />
1. When in the Settings Menu, scroll through the<br />
list of menu items to "Format".<br />
2. Press the MCS to display either 12 hour (AM/<br />
PM) or 24 hour (military) time.<br />
<strong>Medium</strong> <strong>Duty</strong> (R05/09) Y53-6008A – 33 –
Change language