Medium Duty Operator's Manual - Peterbilt Motors Company
Medium Duty Operator's Manual - Peterbilt Motors Company Medium Duty Operator's Manual - Peterbilt Motors Company
Consumer Information and Vehicle Identification Preventive Maintenance Complete Vehicle Certification Label VEHICLE NAME PLATE The Complete Vehicle Certification label certifies that the vehicle complies with all applicable Federal Motor Vehicle Safety Standards. It is located on the driver's side door frame and contains the following information: • Date of manufacture • GVWR — Gross Vehicle Weight Rating • GAWR FRONT and REAR — Gross Axle Weight Ratings for Front and Rear Axle • TIRE/RIM SIZES AND INFLATION PRESSURES — Tire/Rim Sizes and Cold Pressure Minimums • VIN — Vehicle Identification Number MANUFACTURED BY PETERBILT MOTORS CO. DIVISION OF PACCAR Inc . DATE MFD GVWR FR. GAWR 2ND GAWR 3RD GAWR 4TH GAWR SUITABLE TIRE–RIM CHOICE TIRE SIZE RIM SIZE PSI COLD THIS VEHICLE CONFORMS TO ALL APPLICABLE FEDERAL MOTOR VEHICLE SAFETY STANDARDS IN EFFECT ON THE DATE OF MANUFACTURE SHOWN ABOVE VIN TYPE VEH. TRUCK TRACTOR LABEL NO. 22–00709 REV. H COMPLETE VEHICLE CERTIFICATION LABEL — SAMPLE – 260 – Y53-6008A Medium Duty (R05/09)
Preventive Maintenance WARNING! Do not exceed the specified load rating. Overloading can result in loss of vehicle control and serious personal injury, either by causing component failures or by affecting vehicle handling. Exceeding load ratings can also shorten the service life of the vehicle. NOTE: GVW is the TOTAL SCALE WEIGHT the vehicle is designed to carry. This includes the weight of the empty vehicle, loading platform, occupants, fuel, and any load. The tire size and rim size (and the cold inflation pressure to match that combination) listed under “Suitable Tire-Rim Choice” on the Certification Label are only representative examples for the specified axle ratings. These components may not be the ones actually installed on the axle, because there are many other appropriate combinations. The “PSI Cold” inflation pressure on the Certification Label is for the tire-rim combination in the example, and may not be the same as the recommended inflation pressure for the actual tires on that axle. Check the manufacturer's product information for the tires and rims actually on each axle to obtain recommended tire inflation pressure for specific applications. Consumer Information and Vehicle Identification Incomplete Vehicle Certification Label The Incomplete Vehicle Certification Label (for trucks) is located on the driver’s door frame. It contains the following information: • DATE OF MANUFACTURE • VIN — Vehicle Identification Number • LISTING OF APPLICABLE FEDERAL MOTOR VEHI- CLE SAFETY STANDARDS Noise Emission Label The Noise Emission Label is in the map compartment. It contains information regarding U.S. noise emission regulations and date of manufacture. Paint Data Label The Paint Data Label contains the paint colors used by the factory to paint your vehicle. It lists frame, wheels, cab interior and exterior colors. This label is located in the map compartment. Medium Duty (R05/09) Y53-6008A – 261 –
- Page 210 and 211: Tires and Wheels Wheel and Tire Rep
- Page 212 and 213: Heater and Air Conditioner CAUTION:
- Page 214 and 215: Electrical System All the electrica
- Page 216 and 217: Electrical System Overcharge: this
- Page 218 and 219: Electrical System before proceeding
- Page 220 and 221: Electrical System • When fast cha
- Page 222 and 223: Electrical System Electrical and Al
- Page 224 and 225: Cab Maintenance Cleaning, Protectio
- Page 226 and 227: Cab Maintenance At least every spri
- Page 228 and 229: Cab Maintenance • Remove soap wit
- Page 230 and 231: Cab Maintenance Preventive Maintena
- Page 232 and 233: Cab Maintenance Preventive Maintena
- Page 234 and 235: Transmission and Clutch Preventive
- Page 236 and 237: Transmission and Clutch Automatic T
- Page 238 and 239: Steering and Driveline Preventive M
- Page 240 and 241: Front Axle and Suspension Preventiv
- Page 242 and 243: Front Axle and Suspension Torque CA
- Page 244 and 245: Rear Axle and Suspension It is impo
- Page 246 and 247: Rear Axle and Suspension Preventive
- Page 248 and 249: Rear Axle and Suspension Grade 8 Ca
- Page 250 and 251: Frame and Fifth Wheel Fifth Wheel M
- Page 252 and 253: Noise and Emission Control Engine
- Page 254 and 255: Noise and Emission Control Transmis
- Page 256 and 257: Noise and Emission Control Preventi
- Page 258 and 259: Consumer Information and Vehicle Id
- Page 262 and 263: Consumer Information and Vehicle Id
- Page 264 and 265: INDEX INDEX A Accessories 70 Air co
- Page 266 and 267: INDEX Cooling system conventional c
- Page 268 and 269: INDEX G Gauges and Displays 35 Driv
- Page 270 and 271: INDEX use 62, 88, 97, 121, 143, 146
- Page 272 and 273: INDEX U U-Bolt torque 242 Underbody
- Page 274: Y53-6008A 06/09 Printed in the U.S.
Preventive Maintenance<br />
WARNING! Do not exceed the specified load rating.<br />
Overloading can result in loss of vehicle<br />
control and serious personal injury, either by<br />
causing component failures or by affecting vehicle<br />
handling. Exceeding load ratings can also<br />
shorten the service life of the vehicle.<br />
NOTE: GVW is the TOTAL SCALE WEIGHT the<br />
vehicle is designed to carry. This includes the weight<br />
of the empty vehicle, loading platform, occupants,<br />
fuel, and any load.<br />
The tire size and rim size (and the cold inflation pressure to<br />
match that combination) listed under “Suitable Tire-Rim<br />
Choice” on the Certification Label are only representative<br />
examples for the specified axle ratings. These components<br />
may not be the ones actually installed on the axle, because<br />
there are many other appropriate combinations.<br />
The “PSI Cold” inflation pressure on the Certification Label is<br />
for the tire-rim combination in the example, and may not be<br />
the same as the recommended inflation pressure for the<br />
actual tires on that axle.<br />
Check the manufacturer's product information for the tires<br />
and rims actually on each axle to obtain recommended tire<br />
inflation pressure for specific applications.<br />
Consumer Information and Vehicle Identification<br />
Incomplete Vehicle Certification Label<br />
The Incomplete Vehicle Certification Label (for trucks) is<br />
located on the driver’s door frame. It contains the following<br />
information:<br />
• DATE OF MANUFACTURE<br />
• VIN — Vehicle Identification Number<br />
• LISTING OF APPLICABLE FEDERAL MOTOR VEHI-<br />
CLE SAFETY STANDARDS<br />
Noise Emission Label<br />
The Noise Emission Label is in the map compartment. It contains<br />
information regarding U.S. noise emission regulations<br />
and date of manufacture.<br />
Paint Data Label<br />
The Paint Data Label contains the paint colors used by the<br />
factory to paint your vehicle. It lists frame, wheels, cab interior<br />
and exterior colors. This label is located in the map compartment.<br />
<strong>Medium</strong> <strong>Duty</strong> (R05/09) Y53-6008A – 261 –