MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company
MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company
MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating Instructions<br />
Reengaging the Cruise Control<br />
1. Move the ON/OFF switch to the ON position.<br />
or<br />
2. Toggle the SET/RESUME lever to the RESUME position.<br />
Engine Shutdown System (Option)<br />
Your truck may be equipped with the optional engine shutdown<br />
system. This system continually monitors engine coolant<br />
temperature and oil pressure to protect the engine from<br />
dangerous conditions.<br />
• After the engine starts, a warning alarm sounds; this is<br />
normal because of the lack of oil pressure when first<br />
starting the engine. As soon as oil pressure increases,<br />
the buzzer turns off.<br />
• During engine operation, if the oil pressure drops below<br />
idle pressure or the coolant temperature climbs to a dangerous<br />
level, the engine will shut down automatically—<br />
sounding the alarm and turning the appropriate warning<br />
light on.<br />
Operating the Engine<br />
• If the engine shuts down automatically or if the buzzer<br />
and light turn on while the engine is running, drive the<br />
vehicle to a safe stop off the highway to investigate the<br />
problem.<br />
CAUTION: Do not re-start your engine unless it<br />
is necessary to move your truck to a safe location.<br />
The low oil pressure or high engine temperature<br />
condition could cause serious engine<br />
damage.<br />
02889<br />
• If it’s necessary to move the vehicle, hold the manual<br />
override switch up while starting your engine. The alarm<br />
will continue to sound.<br />
• Operate the engine as little as possible until you have it<br />
serviced at an Authorized Service Center.<br />
Model <strong>330</strong> PB1318 3/01 – 63 –