20.05.2014 Views

MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Operating Instructions<br />

STEERING COLUMN AND MIRRORS<br />

Steering Column and Mirrors<br />

• To signal a left turn, push the lever down (counterclockwise).<br />

Introduction<br />

This section covers the standard steering column controls<br />

and mirror operation. Depending on how your Model <strong>330</strong> is<br />

configured, some or all of these features are installed on your<br />

vehicle.<br />

Turn Signal/High Beam Switch<br />

TURN<br />

SIGNAL/HIGH<br />

BEAM SWITCH<br />

EMERGENCY FLASHER<br />

TRAILER<br />

BRAKE VALVE<br />

02596<br />

NOTE: The ignition key must be turned to IGN &<br />

ACC for the signal/switch to operate.<br />

The lever-action turn signal/high beam switch is<br />

located on the left side of the steering column.<br />

Turn Signals<br />

• To signal a right turn, push the lever up (clockwise).<br />

Steering Column Controls<br />

WARNING! After you complete a turn, make sure<br />

the turn signal system is turned off by returning<br />

the lever to the “OFF” (center) position. The<br />

switch’s lever action is NOT self-cancelling. Failure<br />

to shut off a turn signal could confuse other<br />

drivers and result in an injury accident. An indicator<br />

light in the instrument panel will flash until<br />

the turn signal is turned off.<br />

Model <strong>330</strong> PB1318 3/01 – 51 –

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!