MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

Operating Instructions
Using the Parking Brake
1. Come to a complete stop.
Instruments and Controls
2. Apply the parking brake. Pull upward on the parking
brake lever until it reaches an over (top) center position.
(The PARK light on the dash will come on.)
NOTE: Ensure the lever is over center. The light will
come on prior to brake being fully applied.
ENGAGE
CRUISE
CONTROL
SPOT
LIGHT
STOP
ENGINE
P
PARK
CHECK
ENGINE
DISENGAGE
PARKING BRAKE LEVER
PARKING BRAKE INDICATOR
3. Shift the transmission into NEUTRAL position:
4. Turn the key OFF.
5. Remove the key.
6. If you are parked on a grade, always block the
wheels.
Model 330 PB1318 3/01 – 35 –