MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

Preventive Maintenance
Air System
COVER
3. Remove the filter element.
4. Clean out the inside of the air cleaner body and outlet
tube with a dry rag.
To install air cleaner element:
1. Slide air cleaner element into housing.
2. Install air cleaner end cap.
3. Install thumbscrews around air cleaner housing end cap.
00455B
Air Cleaner - Filter Element
To remove the air filter:
1. Remove the two thumb screws.
2. Remove air cleaner service cover.
FILTER ELEMENT
NOTE: The air cleaner is internally sealed by a
radial seal around Inlet tube of air cleaner element.
For further information on servicing the air cleaner,
see the Medium Duty Maintenance Manual.
Model 330 PB1318 3/01 – 171 –