MODEL 330 OPERATOR'S MANUAL - Peterbilt Motors Company

Maintenance Schedule and Lubrication
Preventive Maintenance
Table 3
Maintenance Schedule
INTERVAL
COMMENTS
OPERATION \ FREQUENCY
Brake Chamber Mounting Bolt Torque
Brake Hoses for Cracks and Chafing
Adjust Brakes
Front & Rear Brake Camshaft Tube Lubrication
Clutch Pedal Shaft
Clutch Linkage
Suspension Fittings
Clutch Release Bearing
Driveline Center Bearing
Automatic Slack Adjusters
7,500 mi
12,000 km
15,000 mi
24,000 km
60,000 mi
96,000 km
Synthetic Grease Required – Special
Fitting
No Service Required
AG 200 – 250,000 Mile Service
Required Extended Fittings
No Service Required
Synthetic Lube Required – Special Fittings
Brakes: Lining Remaining (replace as required)
RF ______ RRF ______ RRR ______
LF ______ LRF ______ LRR ______
Drum Condition:
RF ______ RRF ______ RRR ______
LF ______ LRF ______ LRR ______
Chassis Lubrication
Transmission Lubricant Level
Transmission Lubricant and Filter Change C2 Synthetic Lube Required – 500,000 Drain
Rear Axle Lubricant Change C2 Synthetic Lube Required – 500,000 Drain
Front Hub Lubricant Change C2 Synthetic Lube Required – 500,000 Drain
BATTERIES A B C
Signs of Over–Charging
Remove Corrosion and Seal Terminals
– 130 – PB1318 3/01 Model 330