Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors

CONTROLS AND DISPLAY
DASH- AND DOOR-MOUNTED FEATURES
CAUTION: Do not leave the three position switch
in the STOP position unless you need to cancel
or stop regeneration. Leaving the switch in the
STOP position for extended periods of time will
result in increased soot levels in the DPF which
can affect engine performance or disable the
engine.
Power Mirror Switch
If your vehicle is equipped with power mirrors, the mirror
controls will be located on the driver side door pad. Aerodynamic-style
mirrors are controlled for 4-way adjustable
movement, while Moto mirrors are controlled for 2-way
adjustable movement.
WARNING! Convex mirrors can distort images
and make objects appear smaller and farther
away than they really are. You could have an
accident resulting in death or personal injury if
you are too close to another vehicle or other
object. Keep plenty of space between your
vehicle and others when you turn or change
lanes. Remember that other objects are closer
than they may appear.
Mirror Directional
Control Pad
Mirror Selector
Switch
NOTE: The Power Mirror Switch does not control
the adjustment of the convex mirrors.
To Adjust Moto Mirrors
1. Move the mirror selector switch to the right or left from
the neutral center position to select the desired mirror
for adjustment.
NOTE: If the mirror is fixed (non-motorized) on
the left side, then the mirror selector switch will
ONLY allow selection of the neutral and right mirror
switch positions.
Medium Duty (R05/09) Y53-6027 – 57 –