Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
INSTRUMENTS AND CONTROLS CONTROLS AND DISPLAYS 3 criticality. The most critical warning will be displayed on the top row and to the left. If more than six warnings are active, the menu control switch (MCS) can be used to scroll through the additional warnings. 1 2 2. Status Indicator: Additional lights and indicator symbols are displayed in the Status Indicator. They are limited to: a. Park Brake b. Transmission Gear (Automatic transmissions only) c. Warnings: 1. Driver Information Display 2. Status Indicator 3. Lower Light Bar Number of active warnings. Warning lights and indicator symbols will be shown in both areas 1 and 2. Area 3 is dedicated to the turn and high beam indicator symbols. 1. Driver Information Display: The display can show up to six warning lights. Warnings do not have fixed positions and are displayed in order of – 20 – Y53-6027 Medium Duty (R05/09)
CONTROLS AND DISPLAYS INSTRUMENTS AND CONTROLS A red warning is active. First An amber warning is active. Second d. Cruise Control - active e. Clock alarm bell Refer to “Warning Light / Indicator Symbols” on page 22 for information on each symbol. Instrument System Self Test: When the ignition switch is turned on the instrumentation system will undergo a Self Test. This test will verify the operation of the gauges and warnings. During the Instrumentation System Self Test, three screens will sequentially display warning icons (approximately 3 seconds each screen) on the Information Display. These are: Third Refer to “Warning Light / Indicator Symbols” on page 22 for information on each symbol. Completing this sequence will indicate a successful Self Test. Have your instrumentation system checked by a qualitfied service technician if does not successfully complete. Audible Alarm: The audible alarm will sound during the Instrumentation System Self Test. The audible alarm will also sound in conjunction with some warning lights. These events Medium Duty (R05/09) Y53-6027 – 21 –
- Page 2 and 3: Quick Table of Contents •Introduc
- Page 4 and 5: WARNING When you see this word, the
- Page 6 and 7: INTRODUCTION A Special Word About R
- Page 8 and 9: INTRODUCTION information about regu
- Page 10 and 11: CAB AND FRAME ACCESS 02611 • Use
- Page 12 and 13: CAB AND FRAME ACCESS - 12 - Y53-602
- Page 14 and 15: HOOD HOLD DOWNS AND TILT Put one ha
- Page 16 and 17: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 18 and 19: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 22 and 23: INSTRUMENTS AND CONTROLS include bu
- Page 24 and 25: INSTRUMENTS AND CONTROLS Warning Li
- Page 26 and 27: INSTRUMENTS AND CONTROLS Illuminate
- Page 28 and 29: INSTRUMENTS AND CONTROLS 19. Engine
- Page 30 and 31: INSTRUMENTS AND CONTROLS 31. Seat B
- Page 32 and 33: INSTRUMENTS AND CONTROLS Driver Inf
- Page 34 and 35: INSTRUMENTS AND CONTROLS D. Trip In
- Page 36 and 37: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 38 and 39: STANDARD GAUGES CONTROLS AND DISPLA
- Page 40 and 41: STANDARD GAUGES Engine Oil Pressure
- Page 42 and 43: STANDARD GAUGES CAUTION: Keep the e
- Page 44 and 45: OPTIONAL GAUGES CONTROLS AND DISPLA
- Page 46 and 47: OPTIONAL GAUGES operate the signal,
- Page 48 and 49: OPTIONAL GAUGES Wiper Switch Settin
- Page 50 and 51: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 52 and 53: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 54 and 55: DASH- AND DOOR-MOUNTED FEATURES Fog
- Page 56 and 57: DASH- AND DOOR-MOUNTED FEATURES des
- Page 58 and 59: DASH- AND DOOR-MOUNTED FEATURES 2.
- Page 60 and 61: DASH- AND DOOR-MOUNTED FEATURES Man
- Page 62 and 63: DASH- AND DOOR-MOUNTED FEATURES Two
- Page 64 and 65: DASH- AND DOOR-MOUNTED FEATURES (2)
- Page 66 and 67: HEATER-AIR CONDITIONING CONTROLS He
- Page 68 and 69: HEATER-AIR CONDITIONING CONTROLS CO
INSTRUMENTS AND CONTROLS<br />
CONTROLS AND DISPLAYS<br />
3<br />
criticality. The most critical warning will be displayed on<br />
the top row and to the left. If more than six warnings are<br />
active, the menu control switch (MCS) can be used to<br />
scroll through the additional warnings.<br />
1<br />
2<br />
2. Status Indicator:<br />
Additional lights and indicator symbols are displayed in<br />
the Status Indicator. They are limited to:<br />
a. Park Brake<br />
b. Transmission Gear (Automatic transmissions<br />
only)<br />
c. Warnings:<br />
1. Driver Information Display 2. Status Indicator<br />
3. Lower Light Bar<br />
Number of active warnings.<br />
Warning lights and indicator symbols will be shown in both<br />
areas 1 and 2. Area 3 is dedicated to the turn and high<br />
beam indicator symbols.<br />
1. Driver Information Display:<br />
The display can show up to six warning lights. Warnings<br />
do not have fixed positions and are displayed in order of<br />
– 20 – Y53-6027 <strong>Medium</strong> <strong>Duty</strong> (R05/09)
Change language