Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
INSTRUMENTS AND CONTROLS CONTROLS AND DISPLAYS RIGHT SIDE 1 Radio 3 1 2 10 11 12 13 14 15 16 2 Navigation 3 HVAC Controls 4 Emission Controls 5 Engine Brake (on/off) 6 Engine Brake (Select) 7 Optional Switch* 8 Optional Switch* 9 Optional Switch* 10 Park Brake Controls 11 Transmission Display (Automatic) 12 Optional Switch 13 Optional Switch 14 Optional Switch 15 Optional USB Port 4 5 6 16 Optional Switch *These switches are not shown. These switch locations are available only if the automatic transmission selector is not mounted (item 11). – 18 – Y53-6027 Medium Duty (R05/09)
CONTROLS AND DISPLAYS INSTRUMENTS AND CONTROLS Menu Control Switch (MCS) The MCS is used to navigate the Driver Information Display unit. The Menu Control Switch is located on the D Panel as shown in the illustration below. • Rotating the MSC – Selecting display – Setting values • Pushing the MSC – Confirming desired selection Standard Warning Lights and Audible Alarm The warning lights and audible alarm may indicate a system malfunction. Check the lights safely and frequently, and respond properly as soon as you see one go on. These lights could save you from a serious accident. Rotate knob to scroll Push knob to select (Enter) WARNING! Do not ignore a warning light or audbile alarm. These signals tell you something is wrong with your vehicle. It could be a failure in an important system, such as the brakes, which could lead to an accident causing death or injury. Have the appropriate system checked immediately. The MCS has the following functions: Medium Duty (R05/09) Y53-6027 – 19 –
- Page 2 and 3: Quick Table of Contents •Introduc
- Page 4 and 5: WARNING When you see this word, the
- Page 6 and 7: INTRODUCTION A Special Word About R
- Page 8 and 9: INTRODUCTION information about regu
- Page 10 and 11: CAB AND FRAME ACCESS 02611 • Use
- Page 12 and 13: CAB AND FRAME ACCESS - 12 - Y53-602
- Page 14 and 15: HOOD HOLD DOWNS AND TILT Put one ha
- Page 16 and 17: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 20 and 21: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 22 and 23: INSTRUMENTS AND CONTROLS include bu
- Page 24 and 25: INSTRUMENTS AND CONTROLS Warning Li
- Page 26 and 27: INSTRUMENTS AND CONTROLS Illuminate
- Page 28 and 29: INSTRUMENTS AND CONTROLS 19. Engine
- Page 30 and 31: INSTRUMENTS AND CONTROLS 31. Seat B
- Page 32 and 33: INSTRUMENTS AND CONTROLS Driver Inf
- Page 34 and 35: INSTRUMENTS AND CONTROLS D. Trip In
- Page 36 and 37: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 38 and 39: STANDARD GAUGES CONTROLS AND DISPLA
- Page 40 and 41: STANDARD GAUGES Engine Oil Pressure
- Page 42 and 43: STANDARD GAUGES CAUTION: Keep the e
- Page 44 and 45: OPTIONAL GAUGES CONTROLS AND DISPLA
- Page 46 and 47: OPTIONAL GAUGES operate the signal,
- Page 48 and 49: OPTIONAL GAUGES Wiper Switch Settin
- Page 50 and 51: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 52 and 53: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 54 and 55: DASH- AND DOOR-MOUNTED FEATURES Fog
- Page 56 and 57: DASH- AND DOOR-MOUNTED FEATURES des
- Page 58 and 59: DASH- AND DOOR-MOUNTED FEATURES 2.
- Page 60 and 61: DASH- AND DOOR-MOUNTED FEATURES Man
- Page 62 and 63: DASH- AND DOOR-MOUNTED FEATURES Two
- Page 64 and 65: DASH- AND DOOR-MOUNTED FEATURES (2)
- Page 66 and 67: HEATER-AIR CONDITIONING CONTROLS He
CONTROLS AND DISPLAYS<br />
INSTRUMENTS AND CONTROLS<br />
Menu Control Switch (MCS)<br />
The MCS is used to navigate the Driver Information Display<br />
unit. The Menu Control Switch is located on the D<br />
Panel as shown in the illustration below.<br />
• Rotating the MSC<br />
– Selecting display<br />
– Setting values<br />
• Pushing the MSC<br />
– Confirming desired selection<br />
Standard Warning Lights and Audible Alarm<br />
The warning lights and audible alarm may indicate a system<br />
malfunction. Check the lights safely and frequently,<br />
and respond properly as soon as you see one go on.<br />
These lights could save you from a serious accident.<br />
Rotate knob to scroll<br />
Push knob to select (Enter)<br />
WARNING! Do not ignore a warning light or<br />
audbile alarm. These signals tell you something<br />
is wrong with your vehicle. It could be a<br />
failure in an important system, such as the<br />
brakes, which could lead to an accident causing<br />
death or injury. Have the appropriate system<br />
checked immediately.<br />
The MCS has the following functions:<br />
<strong>Medium</strong> <strong>Duty</strong> (R05/09) Y53-6027 – 19 –