Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors Peterbilt Medium Duty Truck Owner's Manual - Peterbilt Motors
CAB AND FRAME ACCESS – 12 – Y53-6027 Medium Duty (R05/09)
ENGINE ACCESS HOOD HOLD DOWNS AND TILT Engine Access Hood Hold Downs and Tilt The hood is locked in its closed position by an external latch on each side. These latches serve as hold downs and keep the hood from opening unexpectedly. CAUTION: If you do not latch the hood securely, it could open during operation and cause vehicle damage. Be sure to latch the hood securely before moving the vehicle. WARNING! A pivoting hood could hurt someone or be damaged itself. Before opening or closing the hood, be sure there are no people or objects in the way. Failure to stand in a position of safety can cause death or personal injury. To open the hood, unlatch both of the hood hold downs. WARNING! Before opening the hood, make sure your footing is secure and stable. Failure to do so may cause the hood to close uncontrollably which may result in death or personal injury. UNLATCHED Medium Duty (R05/09) Y53-6027 – 13 –
- Page 2 and 3: Quick Table of Contents •Introduc
- Page 4 and 5: WARNING When you see this word, the
- Page 6 and 7: INTRODUCTION A Special Word About R
- Page 8 and 9: INTRODUCTION information about regu
- Page 10 and 11: CAB AND FRAME ACCESS 02611 • Use
- Page 14 and 15: HOOD HOLD DOWNS AND TILT Put one ha
- Page 16 and 17: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 18 and 19: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 20 and 21: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 22 and 23: INSTRUMENTS AND CONTROLS include bu
- Page 24 and 25: INSTRUMENTS AND CONTROLS Warning Li
- Page 26 and 27: INSTRUMENTS AND CONTROLS Illuminate
- Page 28 and 29: INSTRUMENTS AND CONTROLS 19. Engine
- Page 30 and 31: INSTRUMENTS AND CONTROLS 31. Seat B
- Page 32 and 33: INSTRUMENTS AND CONTROLS Driver Inf
- Page 34 and 35: INSTRUMENTS AND CONTROLS D. Trip In
- Page 36 and 37: INSTRUMENTS AND CONTROLS CONTROLS A
- Page 38 and 39: STANDARD GAUGES CONTROLS AND DISPLA
- Page 40 and 41: STANDARD GAUGES Engine Oil Pressure
- Page 42 and 43: STANDARD GAUGES CAUTION: Keep the e
- Page 44 and 45: OPTIONAL GAUGES CONTROLS AND DISPLA
- Page 46 and 47: OPTIONAL GAUGES operate the signal,
- Page 48 and 49: OPTIONAL GAUGES Wiper Switch Settin
- Page 50 and 51: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 52 and 53: DASH- AND DOOR-MOUNTED FEATURES CON
- Page 54 and 55: DASH- AND DOOR-MOUNTED FEATURES Fog
- Page 56 and 57: DASH- AND DOOR-MOUNTED FEATURES des
- Page 58 and 59: DASH- AND DOOR-MOUNTED FEATURES 2.
- Page 60 and 61: DASH- AND DOOR-MOUNTED FEATURES Man
ENGINE ACCESS<br />
HOOD HOLD DOWNS AND TILT<br />
Engine Access<br />
Hood Hold Downs and Tilt<br />
The hood is locked in its closed position by an external<br />
latch on each side. These latches serve as hold downs<br />
and keep the hood from opening unexpectedly.<br />
CAUTION: If you do not latch the hood<br />
securely, it could open during operation and<br />
cause vehicle damage. Be sure to latch the<br />
hood securely before moving the vehicle.<br />
WARNING! A pivoting hood could hurt someone<br />
or be damaged itself. Before opening or<br />
closing the hood, be sure there are no people<br />
or objects in the way. Failure to stand in a<br />
position of safety can cause death or personal<br />
injury.<br />
To open the hood, unlatch both of the hood hold downs.<br />
WARNING! Before opening the hood, make<br />
sure your footing is secure and stable. Failure<br />
to do so may cause the hood to close uncontrollably<br />
which may result in death or personal<br />
injury.<br />
UNLATCHED<br />
<strong>Medium</strong> <strong>Duty</strong> (R05/09) Y53-6027 – 13 –
Change language