20.05.2014 Views

Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...

Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...

Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

PART 7: STARTING & OPERATING THE VEHICLE<br />

WARNING! Do not leave the cab without applying<br />

the parking brake. The truck could roll<br />

and cause an injury accident. Always apply the<br />

parking brake before you leave the cab. If your<br />

vehicle has a Freedomline transmission, be<br />

aware that it can roll backwards when stopped<br />

on a hill or grade, or when starting from a stop<br />

on a hill or grade. This could cause serious<br />

damage or personal injury. Observe the following<br />

guidelines:<br />

• When stopped on a hill or grade, press the<br />

brake pedal.<br />

• When starting from a stop on a hill or grade,<br />

quickly remove your foot from the brake<br />

pedal and firmly press on the accelerator<br />

pedal.<br />

Auxiliary Transmission<br />

If you have an auxiliary transmission, see your transmission<br />

manufacturer’s manual for its proper operation.<br />

If Your Vehicle Must Be Towed<br />

If Your Vehicle Must Be Towed<br />

Follow these directions to ensure your vehicle is not damaged<br />

when towing is required.<br />

1. Lift driving wheels off the ground or remove the driveline<br />

and axle shafts before towing the vehicle.<br />

CAUTION: Failure to lift the driving wheels<br />

off the ground or remove the driveline and<br />

axle shafts before towing the vehicle could<br />

seriously damage your vehicle. All lubricating<br />

and clutch application oil pressure is provided<br />

by an engine-driven pump, which does<br />

not work when the engine is stopped. When<br />

vehicles are towed either by wrecker or piggyback,<br />

lubricant in the top front of the drive<br />

axle will drain to the rear. This will leave the<br />

top components dry, resulting in friction that<br />

will seriously damage these components.<br />

2. Cover open hubs when removing drive axle shafts.<br />

R(08/<strong>07</strong>) Y53-6015 – 85 –

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!