Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Transmission Warmup<br />
CAUTION: The use of a winterfront can result<br />
in excessive engine coolant, oil, and charge air<br />
(intake) temperatures, which can lead to overheating<br />
and possible engine damage. If you<br />
mustuseawinterfront<br />
• Refer to the “Engine Operation and Maintenance<br />
<strong>Manual</strong>” for operating restrictions and<br />
recommendations.<br />
• Keep the engine exhaust system and the vehicle’s<br />
cab ventilation system properly maintained.<br />
It is recommended that the vehicle’s<br />
exhaust system and cab be inspected<br />
– By a competent technician every 15,000<br />
miles<br />
– Whenever a change is noticed in the sound<br />
of the exhaust system<br />
– Whenever the exhaust system, underbody,<br />
or cab is damaged<br />
NOTE:<br />
• Do not stay in the vehicle with the engine running<br />
or idling for more than 10 minutes with the<br />
PART 7: STARTING & OPERATING THE VEHICLE<br />
vehicle’s Heater and A/C ventilation system in<br />
RECIRC or at LOW FAN SPEED. Even with the<br />
ventilation system On, running the engine while<br />
parked or stopped for prolonged periods of time<br />
is not recommended.<br />
• If other vehicles are parked next to you idling,<br />
move your vehicle or do not stay in your vehicle<br />
for prolonged periods of time.<br />
Transmission Warmup<br />
WARNING! Do not operate this vehicle if you notice<br />
a gradual or sudden increase in cable shift<br />
effort or a decrease in the usable travel. Take<br />
the vehicle to the nearest authorized <strong>Peterbilt</strong><br />
dealer for repair. Failure to correct either of<br />
these conditions could result in serious injury<br />
or death.<br />
CAUTION: Cables are designed to be contaminant<br />
resistant, not contaminant proof. Protect<br />
cable from contaminants, chemicals, and physical<br />
damage which may damage the control cable.<br />
– 76 – Y53-6015 R(08/<strong>07</strong>)