Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
Peterbilt Model 320 Operator's Manual after 8-07 - Peterbilt Motors ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Heating And Air Conditioning Controls<br />
PART 4: CONTROLS AND DISPLAYS<br />
Air Conditioning System<br />
Your vehicle may be equipped with either of two air conditioning<br />
systems. Cab interior air is continuously recirculated<br />
and cooled by these systems. In both systems, the<br />
compressor, receiver-dryer, and condenser are located in<br />
the engine compartment. (Note: In some applications, the<br />
condenser may be mounted on the cab roof.)<br />
Dash-mounted System<br />
In one system, the evaporator and blower are located inside<br />
the heater unit, under the passenger dashboard. Controls<br />
for this system are located in a modified heater control<br />
head.<br />
02981A<br />
To cool the cab, turn on the air conditioning system, then<br />
adjust the air temperature and blower speed until comfortable.<br />
The amount of cooling is controlled by<br />
• the temperature of the evaporator core<br />
• the speed of the blower that forces air through the core<br />
andintothecab<br />
• the amount of heat added to the recirculated cab air<br />
by the air temperature control<br />
Ceiling-mounted System<br />
In another system, the evaporator and blower are located<br />
in a ceiling-mounted unit. This system’s control panel is<br />
– 40 – Y53-6015 R(08/<strong>07</strong>)