Instruction - Pentron Clinical

More documents

Recommendations

Info

F I B E R R E I N F O R C E D C O M P O S I T E S ( F R C ) 3 - U N I T F U L L C O V E R A G E B R I D G E T E C H N I Q U E 46. Check occlusal relationship with the opposing model. 47. Cure in the Sculpture Curing Light using the Final cycle. 48. Contour then polish using a combination of Upofix * wheels, cotton buff wheels and Sculpture Glo ® (Fig 30). Refer to the Sculpture Plus <strong>Instruction</strong> Manual for additional detail on polishing and optional glazing of Sculpture Plus composites. 49. Submerge the finished restoration in distilled water to clean. Do not submerge restoration in alcohol at any time. 50. FibreKor/Sculpture Plus bridge is ready for delivery. (Fig 31) * Upofix is a trademark of Austenal, Inc. Fig. 30 Fig. 31 14
F I B E R R E I N F O R C E D C O M P O S I T E S ( F R C ) M A R Y L A N D B R I D G E T E C H N I Q U E Please provide the FibreKor Preparation Guide to your dentist and review prior to operative procedures. Ensure that a posterior proximal box or anterior step is provided on all abutment preparations. Avoid fiber exposure in the oral environment. FibreKor frameworks should be completely covered in Sculpture Plus composite. 1. Prepare die/model as described on Page 4. Ensure that the model is removable from the articulator. 2. Apply a thin layer of Sculpture Plus Body material to the lingual wings of the prepared abutment dies (Fig 1). Do not cure. Note: For additional details on Sculpture Plus composite build-up technique refer to the Sculpture Plus <strong>Instruction</strong> Manual. 3. Measure the longest distance of the inter-proximal span including the mesial and distal box preps. (Fig 2) 4. Measure and cut a strip of 16K FibreKor material to the same length. (Fig 3) 5. Position the 16K strip in the inter-proximal boxes as shown and press gently into place (Fig 4). Use additional strips of FibreKor material as space permits. FibreKor strips should fill the box preparation area completely. Do not cure. 6. Measure the longest total distance of the preparation from distal to distal, as shown. (Fig 5) 7. Measure, mark and cut 2 or more strips of the desired shade of 2K or 4K FibreKor material to the same length. (Fig 6) 8. Neatly stack the strips of 2K or 4K material and flatten together. Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 15
Page 2 and 3: F I B E R R E I N F O R C E D C O M

Instruction - Pentron Clinical

Create successful ePaper yourself

Delete template?

Save as template?