IntelliTouch Expansion Center Installation Guide - Pentair

4
Installing the Outdoor Control Panel
The Expansion Center Outdoor Control Panel includes a motherboard and Personality board. The
Personality board is mounted on top of the Motherboard which mounts on the back of the Outdoor
Control Panel. The Outdoor Control Panel installs in the top part of the Expansion Center.
To install the Outdoor Control Panel in the Expansion Center:
1. Unlatch the front door spring latches, and open the front door of the Expansion Center.
2. Remove the cover-panel screws securing the high voltage cover-panel, and remove it from
the enclosure.
3. Mount the Outdoor Control Panel in the top part of the Expansion Center. Secure it with two
access screws on the bottom edge of control panel. Once secured, the Outdoor Control
Panel can hinge out and down to access the Personality board for low voltage connections.
4. When finished with the relay, and transformer connections (see pages 6 through 9), close
the hinged Outdoor Control Panel and secure it with the two access screws.
5. Install the cover-panel and secure it with the two retaining screws.
6. Close the front door of the Expansion Center. Fasten the two spring latches.
Outdoor Control Panel
Access screw
Access screw
Cover-panel screw
(Cover-panel not shown)
Cover-panel screw
Retaining screw
Retaining screw
Expansion Center
IntelliTouch Expansion Center Kit Installation Guide