Intelliflo VF Installation / Owners Manual - Pool Center
Intelliflo VF Installation / Owners Manual - Pool Center
Intelliflo VF Installation / Owners Manual - Pool Center
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
19<br />
Filter Mode (Continued)<br />
Clean Filter Pressure Example<br />
The following example shows the “Clean Filter Pressure” set to 14 PSI.<br />
IntelliFlo ®<br />
FILTER 1:37<br />
43.GPM<br />
FLOW<br />
RUNNING Schedule<br />
10<br />
psi<br />
IntelliFlo ®<br />
Alert<br />
Service System Soon<br />
24<br />
psi<br />
Filter<br />
Vacuum<br />
Back<br />
Wash<br />
<strong>Manual</strong><br />
Filter<br />
Filter<br />
Vacuum<br />
Back<br />
Wash<br />
<strong>Manual</strong><br />
Filter<br />
Select<br />
Escape<br />
Select<br />
Escape<br />
On<br />
Enter<br />
Menu<br />
On<br />
Enter<br />
Menu<br />
Warn.<br />
Warn.<br />
Alarm<br />
Alarm<br />
Feature<br />
1<br />
Feature<br />
2<br />
Start<br />
Stop<br />
Reset<br />
Feature<br />
1<br />
Feature<br />
2<br />
Start<br />
Stop<br />
Reset<br />
Pump newly installed and<br />
system run for the first<br />
time<br />
12 months later filter attains<br />
24 psi of internal pressure<br />
which is a 14 psi increase<br />
Alert Status<br />
Once the “Alert” is triggered the yellow warning LED is lit and “Alert” is displayed on<br />
the screen. The pump will reduce speed to maintain 14 PSI of head pressure and stop<br />
managing flow. Note the following:<br />
• The % clean filter pressure has reached 100%.<br />
IntelliFlo ®<br />
Alert<br />
Service System Soon<br />
• If parameter is set to 14 PSI every 10% on the display is 1.4 psi on the filter.<br />
Filter<br />
Vacuum<br />
Back<br />
Wash<br />
<strong>Manual</strong><br />
• If the parameter is set to 10 PSI every 10% on the display is 1 psi on the filter.<br />
Select<br />
Escape<br />
• The filter must be cleaned or backwashed to reduce the pressure. Even if the<br />
system has a cartridge filter the IntelliFlo must be started in Backwash Mode<br />
with a clean filter to reset the fault and "zero" the IntelliFlo's filter status reading.<br />
On<br />
Warn.<br />
Alarm<br />
Feature<br />
1<br />
Feature<br />
2<br />
Enter<br />
Start<br />
Stop<br />
Menu<br />
Reset<br />
Note: For a complete list of IntelliFlo alert warnings, refer to “Alert and<br />
Warning” on page 49.<br />
IntelliFlo <strong>VF</strong> <strong>Installation</strong> and User’s Guide
Change language