Intelliflo VF Installation / Owners Manual - Pool Center
Intelliflo VF Installation / Owners Manual - Pool Center
Intelliflo VF Installation / Owners Manual - Pool Center
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4<br />
IntelliFlo Drive Assembly and Control Panel<br />
The IntelliFlo drive assembly consists of an operator control panel and the system electronics that drive the<br />
230 VAC single phase (260 VAC~170 VAC) motor. The drive microprocessor controls the motor by<br />
changing the frequency of the current it receives together with changing the voltage to control the rotational<br />
speed.<br />
Operator Control Panel,<br />
buttons and LED<br />
(see page 5)<br />
AC power connection<br />
compartment<br />
(see page 32)<br />
Motor stand<br />
IntelliFlo Drive Assembly<br />
Operator Control Panel Features<br />
• Backwash and Rinse — Informs the user when and how to backwash filter media<br />
• Vacuum — Can be preset using duration and flow parameters to save energy<br />
• Filter — Allows pump to run at peak efficiency, saving users up to 90% in energy cost, based on a<br />
pool size up to 15,000 gallons, one turn per day with a 24 hour cycle<br />
• Feature — Ten feature modes can be programmed to control filtration duration, start and stop time,<br />
and frequency for cleaners, water features, spas, and waterfalls<br />
• <strong>Manual</strong> — Allows the user to override all programming and run the pump using RPM or flow<br />
(GPM) control parameters. All personnel safety devices and alarms do not operate in speed mode.<br />
IntelliFlo <strong>VF</strong> <strong>Installation</strong> and User’s Guide