Intelliflo VF Installation / Owners Manual - Pool Center

2
IntelliFlo Features
• Sizes itself to any pool
• Reduces energy cost by as much as 90%
• Protects against loss of prime or flow blockage
• Prevents thermal overload
• Detects and prevents damage from under and over voltage conditions
• Protects against freezing
• Can communicate with an IntelliTouch or IntelliComm system via a two-wire connection
• Easy to read operator control panel LCD display
• Operator control panel buttons for pump modes
• Built-in strainer pot and volute
• Ultra energy-efficient TEFC Square Flange Motor
• Compatibility with most cleaning systems, filters, and jet action spas
• 16-button LCD control panel
• Drive assembly features permanent magnet synchronous motor
• Heavy-duty, durable construction designed for long life
• Internal 24-hour clock for setting controlled on/off times for filtering and up to ten water features
• UL listed
IntelliFlo Motor Assembly
The IntelliFlo’s three-phase, six-pole, permanent magnet motor operates at 3450 RPM (at 92% efficiency)
and 400 RPM (at 90%). The motor assembly is continually cooled by an external fan. Dual seals on the
motor shaft and at the fan assembly seal the entire motor from any moisture entering the motor assembly.
For added protection, a slinger located in front of the main shaft seal assists in slinging water away from the
shaft opening in the flange.
IntelliFlo VF Installation and User’s Guide